Besa machine gun

Machine Gun, BESA

Besa machine gun
Type Tank mounted Medium machine gun
Place of origin Czechoslovakia
Service history
Used by United Kingdom, Ireland
Wars Second World War
Production history
Designer Václav Holek
Designed 1936
Manufacturer The Birmingham Small Arms Company Limited
Number built 7.92mm: 39,332 in all variants. 15mm: 3,218 total production.
Variants Mark I (1939-1940)
Mark II (1940-1943)
Mark II*(1943)
Mark III (1943-1951)
Mark III* (1943-1952)
Mark III/2 (1952-1966)
Mark III/3 (1954-1966)
15mm BESA Mark I (1939?-1949)
Specifications
Weight 47 lb (21 kg) empty
Length 43.5 in (1,100 mm)
Barrel length 29 in (740 mm), 4-groove rifling with Right Hand twist.
Cartridge 7.92×57mm Mauser
Calibre 7.9mm
Action gas automatic
Rate of fire 450-550 round/min (Low)
750-850 rounds/min (High)
Muzzle velocity 2,700 ft/s (823 m/s)
Feed system 7.92mm: 225 metal link belt. 15mm: 25-round link belt.

The Besa machine gun was a British version of the Czechoslovak ZB-53 air-cooled, belt-fed machine-gun, which in the Czechoslovak army was marked as the TK vz. 37.[note 1] It was used extensively by the armed forces of United Kingdom during the Second World War, as a mounted machine gun for tanks and other armoured vehicles, to replace the heavier, water-cooled Vickers machine gun. Although it required a rather large opening in the tank's armour, it was dependable and reliable. The name came from the Birmingham Small Arms Company (BSA), who signed an agreement with Československá zbrojovka to manufacture the gun in the UK. The War Office ordered the weapon in 1938, and production began in 1939, after modifications.

Development and use

Vickers Light Tank AA MkI with 4 Besa machine guns
German 7.92×57mm Mauser ball ammunition dating from 1941. This ammunition could be used in the Besa if necessary

Although Britain's armed forces used the .303 in rimmed round for rifles and machine guns, the ZB-53 had been designed for the German 7.92×57mm Mauser round - referred to by the British as the 7.92mm. Although it had been intended for the British to move from rimmed to rimless ammunition generally, with war imminent wholesale change was not possible. It was considered by BSA and the Ministry of Supply that the industrial, technical, and logistical difficulty of converting the design to the .303 round would be more onerous than retaining the original calibre, especially given that the chain of supply for the Royal Armoured Corps was already separate from the other fighting arms of the British Army. As a consequence, the round was not changed for British production. Since the Besa used the same ammunition as Germany used in its rifles and machine guns, the British could use stocks of captured enemy ammunition.

While American-produced armoured cars or tanks would have been fitted with .30 cal Browning machine guns, many British tanks and armoured cars would be equipped with the Besa machine gun. It fed from non-disintegrating disposable 225-round steel metal-link belts.

The Mark II version entered service in June, 1940. It was modified with a selector to give a high rate of fire (750-850 rounds per minute) for close combat or focused targets or a low rate of fire (450-550 rounds per minute) for long-range combat or area targets. As the war progressed the design was modified to be more rapidly and economically produced. Three simplified models, the Mark II*, Mark III and Mark III*, entered service in August, 1943. The Mark II* was a transitional model designed to use the new simplified parts, but had backwards compatibility with the Mark II. The Mark III and Mark III* versions did away with the rate selector and had simplified parts like the Mark II*, but were not backwards compatible with the Mark II. The Mark III had a fixed high rate of fire (750-850 rpm) and the Mark III* had a fixed low rate of fire (450-550 rpm)[1]

The earlier wartime Mark I, Mark II, and Mark II* versions of the Besa 7.92 mm were declared obsolete in 1951 and all Mark III versions were converted to Mark III*. The Mark III/2 introduced in 1952 was a conversion of the Mark III* with a new bracket and body cover. The later Mark III/3 introduced in 1954 was a conversion of the Mark III/2 that replaced the barrel and sleeve and made the gas vents larger on the gas cylinder to make it easier to use belts of mixed ammunition. The post-war Mark III/2 and Mark III/3 remained in service until the late 1960s.

7.92x57mm BESA Ammunition
Designation In Service Markings
Cartridge S.A. Ball 7.92 m/m Mark Iz May, 1939 - November, 1941 Purple annulus, Iz on headstamp.
Cartridge S.A. Ball 7.92 m/m Mark IIz September, 1941 - 1966 Purple annulus, IIz on headstamp
Cartridge S.A. Tracer 7.92 m/m G Mark Iz October 1939 - November, 1941 Red annulus, GIZ on headstamp
Cartridge S.A. Tracer 7.92 m/m G Mark IIz September, 1941 - 1945 Red annulus, GIIZ on headstamp
Cartridge S.A. Tracer 7.92 m/m G Mark 3z April, 1945 - 1966 Red annulus, G3Z on headstamp
Cartridge S.A. Armour-Piercing 7.92 m/m W Mark Iz March, 1941 - November 1941 Green annulus, WIZ on headstamp
Cartridge S.A. Armour-Piercing 7.92 m/m W Mark IIz September, 1941 - 1966 Green annulus, WIIZ on Headstamp
Cartridge S.A. Incendiary 7.92 m/m B Mark Iz 1942-1966 Blue annulus, BIZ on headstamp

15mm Besa machine gun

A larger, heavier - at 57 kg (125 lb) - 15 mm version, also belt-fed, was developed by BSA from the Czechoslovak ZB vz.60 heavy machine-gun as vehicle armament. It could be fired in semi-automatic mode as well as fully automatic. It was introduced in British service in June, 1940 and was used on the Light Tank Mk VIC and on armoured cars such as the Humber Armoured Car Marks I–III. Over 3,200 15mm BESA were manufactured until it was declared obsolete in 1949.[2] It fired a 75 gram bullet from a 15×104mm cartridge with a muzzle velocity of 818.3 m/s (2,685 ft/s) at a rate of 450 rounds per minute.[3] A few of the original ZB-60 guns were also used by the SS although mostly with the ammunition of the MG 151/15, which was slightly shorter having a case length of only 101 mm.[4] The 15 mm Besa was fed from 25-round metal belts, which limited its practical rate of fire, although the weapon was usually used for single shots as it was difficult to fire accurately in automatic.[5]

See also

References

Notes
  1. ↑ "TK" from těžký kulomet "heavy machine gun"; "vz" from vzor "Model"
Citations
  1. ↑ http://www.militaryfactory.com/smallarms/detail.asp?smallarms_id=221 accessed 27 December 2007
  2. ↑ Jane's Infantry Weapons. 1975. p. 453.
  3. ↑ "British Tanks Equipment". Archived from the original on 16 September 2011. Retrieved 25 December 2014.
  4. ↑ Мастер-ружье issue 116, Nov 2006, p. 67
  5. ↑ David Fletcher (1989). Universal Tank: British Armour in the Second World War - Part 2. HMSO. ISBN 0-11-290534-X. p.20
Bibliography

External links

Wikimedia Commons has media related to Besa.
This article is issued from Wikipedia - version of the 11/18/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.