Aerial crane

A Sikorsky S-64 Skycrane carrying a house

An aerial crane or flying crane is a helicopter used to lift heavy loads. As aerial cranes, helicopters carry loads connected to long cables or slings in order to place heavy equipment when other methods are not available or economically feasible, or when the job must be accomplished in remote or inaccessible areas, such as the tops of tall buildings or the top of a hill or mountain, far from the nearest road. Helicopters were first used as aerial cranes in the 1950s, but it was not until the 1960s that their popularity in construction and other industries began to catch on. The most consistent use of helicopters as aerial cranes is in the logging industry to lift large trees out of rugged terrain where vehicles aren't able to reach, or where environmental concerns prohibit the buildings of roads.[1] These operations are referred to as longline because of the long, single sling line used to carry the load.[2]

History

Bell 47 helicopters were the first, lightweight aerial cranes to be used in the early 1950s. Unfortunately, due to the helicopter's limited power, it was never capable of carrying more than just a few hundred pounds of cargo. In the 1960s, the Sikorsky S-58 replaced the Bell 47 because of its larger power margin. Even today, S-58s can be found carrying medium-size loads. The 1960s also brought the Bell 211 HueyTug, a specially produced commercial version of the UH-1C for lifting medium loads, and even the popular Bell 206 was used for light loads. But there continued to be a demand for aircraft able to lift even larger loads

Larger helicopters became commercially available after the Vietnam War as helicopter manufacturers focused on selling commercial versions of their military aircraft. For instance, Boeing Vertol Model 107 and Model 234 aircraft have been used to carry even heavier payloads than their lighter predecessors. But the heaviest loads required a pure aerial crane. The answer came from Sikorsky's S-64 Skycrane.[3] Originally produced for the military as the CH-54 Tarhe for heavy lifting of downed aircraft and artillery pieces, the S-64 Skycrane was nothing more than just enough airframe to attach two powerful engines, the main and tail rotors and transmissions, a cockpit, and a cargo hook and winch system.

Skycranes were used in 1972 when the Chesapeake Bay Bridge connecting Maryland and the Eastern Shore was being built to bring concrete and other supplies to the construction site. In 1993, an Erickson aerial Skycrane, normally used for hauling lumber in Oregon, was used to remove the “Statue of Freedom” from the top of the Capitol dome in Washington, D.C. The statue was placed on the ground while it was being cleaned and restored before being gently returned to the top of the dome, once again with a Skycrane.

Purpose-designed aircraft

Companies using aerial cranes

This is a list of companies that have used aerial cranes in their operations.

Company Aircraft Country
Canadian Air Crane (now part of Erickson Air-Crane) Erickson S-64E and S-64F Canada
Carson Helicopters Sikorsky S-61 United States
Columbia Helicopters Boeing Vertol 107-II United States
Columbia Helicopters Boeing 234 United States
Construction Helicopters, Inc. Sikorsky S-61N United States
Construction Helicopters, Inc. S-58T United States
Construction Helicopters, Inc. B206L4 United States
Construction Helicopters, Inc. UH-1B United States
Croman Corporation Sikorsky S-61 United States
Erickson Air-Crane Erickson S-64 Aircrane United States
Evergreen Helicopters, Inc. Erickson S-64 Skycrane United States
Evergreen Helicopters, Inc. Sikorsky S-61 United States
Heavy Lift Helicopters CH-54 Tarhe United States
Heavy Lift Helicopters CH-53 Sea Stallion United States
Helicopter Express [Kaman K-MAX]] United States
Swanson Group Aviation Kaman K-MAX United States
Swanson Group Aviation Aérospatiale Lama United States
Tri-Eagle Logging Sikorsky S-64 United States

Logging

Louisiana Pacific was formed in 1972 as part of a settlement, charges of monopolizing by the Federal Trade Commission, against Georgia-Pacific. Not only was there a timber shortage but the company was short on timber reserves. One solution was the forming of Tri-Eagle Logging, that included Sillers Brothers Logging, Evergreen Logging, and Georgia Pacific, to log the Plumas National Forest for the United States Forest Service in the Sierra Nevada. Traditional methods were impractical so the company used the Sikorsky Aircraft S-64 Skycrane[4]

References

  1. Stephens, Ernie. "Helicopter Training on the job: Flying the Line". Rotor & Wing. March 2007. Accessed on 1 November 2008.
  2. Webster, L. F. The Wiley Dictionary of Civil Engineering and Construction. New York: Wiley, 1997. ISBN 0-471-18115-3
  3. S-64 Skycrane-Retrieved 2016-09-05
  4. id=VGaA1ddhR5EC&pg=PA125&lpg=PA125&dq=%22Logging+in+Plumas+County%22+by+Scott+L.+Lawson&source=bl&ots=u_kufx9MoY&sig=Yb1oiMwIxBSl_XdHcZQqT43Bges&hl=en&sa=X&ved=0ahUKEwidw4aervnOAhVFSCYKHfMkBJoQ6AEILjAD#v=onepage&q=%22Logging%20in%20Plumas%20County%22%20by%20Scott%20L.%20Lawson&f=false Logging in Plumas County]: pp. 53-54; Arcadia Publishing, 2008 by Scott L. Lawson- Retrieved 2016-09-05. ISBN 0-738-55929-6
  • Day, Dwayne A. "Skycranes". (web essay). Centennial of Flight Commission. Accessed on 12 October 2008.

External links

This article is issued from Wikipedia - version of the 10/10/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.