Amax Sport 1700

Sport 1700
Role Homebuilt aircraft
National origin Australia
Manufacturer Amax Engineering
Status Production completed
Number built at least one
Unit cost
US$12,500 (kit, less engine, propeller and instruments, 1998)

The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.[1]

Design and development

The Sport 1700 features a strut-braced parasol wing, a two-seats-in-tandem open cockpit with a windshield, fixed conventional landing gear and a single engine in tractor configuration.[1]

The aircraft fuselage is made from welded 4130 steel tubing, while the wing is of wooden construction, with the whole aircraft covered in doped aircraft fabric. Its 33.00 ft (10.1 m) span wing has a wing area of 146.00 sq ft (13.564 m2) and are capable of folding for storage for ground transport. The acceptable power range is 85 to 110 hp (63 to 82 kW).[1]

The Sport 1700 has an empty weight of 600 lb (270 kg) and a gross weight of 1,300 lb (590 kg), giving a useful load of 700 lb (320 kg). With full fuel of 16 U.S. gallons (61 L; 13 imp gal) the payload is 604 lb (274 kg).[1]

The manufacturer estimates the construction time from the supplied kit as 500 hours.[1]

Specifications (Sport 1700)

Data from AeroCrafter[1]

General characteristics

Performance

References

  1. 1 2 3 4 5 6 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 114. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.