Baker MB-1 Delta Kitten
For the similar named Martin Aircraft, see Martin MB-1.
MB-1 Delta Kitten | |
---|---|
Role | Experimental aircraft |
National origin | United States |
Manufacturer | Baker Air Research |
Designer | Marion Baker |
First flight | 1960 |
|
The Baker MB-1 was a 45 degree delta winged experimental aircraft designed to maximize use of its 85 hp (63 kW) engine and experiment with delta-winged design.[1]
Design and development
The prototype was built around the remains of a wrecked Cessna 140 using its engine, propeller, and wheels.[2] The landing gear was fashioned from truck springs. The controls were conventional with the elevator in the center of the delta's trailing edge and ailerons outboard operated by push-pull tubes.[3] Plans for the aircraft were available for homebuilt construction.[4]
Specifications
Data from Sport Aviation January 1962
General characteristics
- Crew: one
- Length: 13 ft 3 in (4.04 m)
- Wingspan: 18 ft (5.5 m)
- Height: 5 ft 8 in (1.73 m)
- Wing area: 98 sq ft (9.1 m2)
- Empty weight: 584 lb (265 kg)
- Max takeoff weight: 843 lb (382 kg)
- Powerplant: 1 × Continental C85 four-cylinder horizontally-opposed air-cooled engine, 85 hp (63 kW)
- Propellers: 2-bladed
Performance
- Maximum speed: 117 kn; 217 km/h (135 mph)
- Cruise speed: 100 kn; 185 km/h (115 mph)
- Service ceiling: 12,000 ft (3,700 m)
See also
- Aircraft of comparable role, configuration and era
References
This article is issued from Wikipedia - version of the 3/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.