Bristol Siddeley BS100

BS100
Bristol Siddeley BS100 on display at the Fleet Air Arm Museum.
Type Vectored thrust turbofan
Manufacturer Bristol Siddeley Engines Limited
First run 1960
Major applications Hawker Siddeley P.1154 (intended)
Number built 6


The Bristol Siddeley BS.100 was a British twin-spool, vectored thrust, turbofan aero engine that first ran in 1960, the engine was designed and built in limited numbers by Bristol Siddeley Engines Limited. The project was cancelled in early 1965.

Design and development

Based on the 300-series Olympus,[1] the BS.100 was similar in general arrangement to that of the company's Pegasus design, but with the addition of plenum chamber burning (PCB), to enable the projected Hawker Siddeley P.1154 VSTOL fighter design to accelerate to supersonic speed.[2] PCB is akin to reheat, but is only applied to the bypass stream (i.e. the front nozzles), as the flow turns from fan exit to the nozzle bearing plane. Variable area front nozzles were required, to maintain consistent fan matching regardless of whether the PCB was alight.

The BS.100 was also intended for the Fokker Republic D-24.[3][4]

Engines on display

A preserved Bristol Siddeley BS100 is on public display at the Fleet Air Arm Museum, RNAS Yeovilton.

Specifications (BS100)

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

References

Notes

Bibliography

  • Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
Wikimedia Commons has media related to Bristol Siddeley BS100.
This article is issued from Wikipedia - version of the 5/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.