Bristol Type 84 Bloodhound
Bloodhound | |
---|---|
Role | Fighter/Reconnaissance |
Manufacturer | Bristol Aeroplane Company |
Designer | Wilfred Reid |
First flight | May 1923 |
Status | Prototype only |
Number built | 4 |
|
The Bristol Bloodhound was a British two-seat reconnaissance/fighter aircraft designed and built by the Bristol Aeroplane Company as a possible replacement for the Bristol F.2 Fighter for the Royal Air Force. It was unsuccessful, only four prototypes being built.
Development and design
After the failure of the two-seat version of the Bristol Bullfinch, the requirement remained for an aircraft for the Royal Air Force to replace the Bristol F.2 Fighter. The Air Ministry therefore issued Specification 3/22 in 1922 for a two-seat fighter powered by a supercharged engine. Bristol's chief designer, Wilfred Reid (who had replaced Frank Barnwell when Barnwell emigrated to Australia), designed the Bristol Type 84 Bloodhound to meet this requirement, with Bristol deciding to build a prototype as a private venture.[1]
The Bloodhound was a two-seat biplane with swept two-bay wings, powered by a Bristol Jupiter IV radial engine. It first flew at the end of May 1923.[1] It was redesigned with a lengthened fuselage and revised wings when Frank Barnwell returned from Australia to resume his role as chief designer. The Air Ministry placed an order for three Bloodhounds to a revised specification (22/22), of which one was of all-metal construction and the other two fitted with wooden wings,[2] the first of these flying on 4 February 1925. After evaluation by the Aeroplane and Armament Experimental Establishment at RAF Martlesham Heath and Farnborough, it was clear that the Bloodhound was not adequate for the role of replacing the F.2. The other aircraft being evaluated against the specification to replace the F.2 in the reconnaissance role, the Hawker Duiker, Armstrong Whitworth Wolf and de Havilland D.H.42 Dormouse, were also found lacking.
The first prototype was fitted with a new Jupiter V engine, and received a civil certificate of airworthiness before being flown in the 1925 King's Cup Race. It was then fitted with a Jupiter VI engine and long-range fuel tanks as an engine testbed,[3] proving the reliability of the Jupiter for Imperial Airways [1] before finally being scrapped in 1931.
Operators
Specifications (Bloodhound)
Data from The British Fighter since 1912 [2]
General characteristics
- Crew: two
- Length: 26 ft 6 in (8.08 m)
- Wingspan: 40 ft 2 in (12.25 m)
- Height: 10 ft 8 in (3.25 m)
- Wing area: 494 ft² (45.9 m²)
- Empty weight: 2,515 lb (1,143 kg)
- Loaded weight: 4,236 lb (1,925 kg)
- Powerplant: 1 × Bristol Jupiter IV radial engine, 425 hp (317 kW)
Performance
- Maximum speed: 113 kn (130 mph, 209 km/h) at sea level
- Service ceiling: 22,000 ft (6,700 m)
- Wing loading: 8.57 lb/ft² (41.9 kg/m²)
- Power/mass: 0.10 hp/lb (0.16 kW/kg)
- Endurance: 3 hours
Armament
- Guns: 1 × fixed, forward-firing .303 in (7.7 mm) Vickers machine gun and 1 × .303 in (7.7 mm) Lewis gun on a Scarff ring in rear cockpit.
- Bombs: 4 × 20 lb (9 kg) bombs
Notes and references
External links
Wikimedia Commons has media related to Bristol Type 84 Bloodhound. |
- G-EBGG
- British Aircraft Directory
- The transport Archive - Type 84 - Bristol Bloodhound
- "Bristol 'Jupiter' Endurance Test" a 1926 Flight article