Interstate 380 (California)

Interstate 380
Quentin L. Kopp Freeway
Route information
Defined by Streets and Highways Code § 608
Maintained by Caltrans
Length:	1.670 mi[1] (2.688 km)
Existed:	1964 – present
Major junctions
West end:	I-280 in San Bruno
East end:	US 101 in South San Francisco
Location
Counties:	San Mateo
Highway system
Interstate Highway System Main Auxiliary Suffixed Business State highways in California Interstate U.S. State Pre-1964 History Unconstructed Deleted Freeway Scenic ← SR 371 US 395 →

Interstate 380 (I-380) is a short 1.7-mile (2.7 km) east–west spur Interstate Highway in the San Francisco Bay Area of Northern California, connecting Interstate 280 in San Bruno to U.S. Route 101 near the San Francisco International Airport (SFO). The highway primarily consists of only three intersections: I-280, El Camino Real (State Route 82), and U.S. 101. Like nearby I-280, I-380 never connects to Interstate 80, its parent Interstate Highway. However, there is no rule that says that spur routes need to. (Similarly, the spur route Interstate 795 branches off from Interstate 695, a beltway around Baltimore, and is only indirectly linked to Interstate 95.)

I-380 is officially known as the Quentin L. Kopp Freeway, named after the prominent Calif. State Senator from San Mateo County. This highway was previously named the Portola Freeway to honor the eighteenth-century Spanish explorer Gaspar de Portolá, whose expedition in 1769-70 discovered the San Francisco Bay, from a viewpoint on the Sweeney Ridge located between San Bruno and Pacifica.

Interstate 380 is part of the California Freeway and Expressway System.^[2]

Route description

Along eastbound on I-380 near the SR 82 exit. Note the very broad freeway median.

I-380 begins at a junction with I-280 in San Bruno. This junction is really only partially built, allowing room to build a proposed freeway extension west towards State Route 1 (see below). I-380 then travels east through the City of San Bruno, intersecting with State Route 82, El Camino Real, before reaching US 101.

At its terminus at US 101, the mainline lanes of I-380 continue to North Access Road. Meanwhile, the ramps to and from southbound US 101 provide connections to collector/distributor roads leading directly to San Francisco International Airport, allowing traffic between the Interstate and the airport to avoid merging with the main traffic lanes of US Highway 101.

History

There were plans to extend I-380 all the way to State Route 1 (the Cabrillo Highway), but due to the route's passing over the San Andreas Fault and opposition from members of the local community, this project has yet to be tackled. The westbound lanes of I-380 branch off to the right at I-280, leaving a very wide, paved space which would carry the freeway extension under I-280 towards SR 1. This space is currently often used as storage space for equipment used in highway maintenance. A pair of unused bridges crossing over the I-280 South to I-380 East offramp remain as evidence.

Despite the opposition, Chapter 2, Article 3, Section 608 of the California Streets and Highways Code still legally defines Route 380 as traveling from "Route 1 near Pacifica to Route 280 in San Bruno",^[3] and the exit numbers assigned at I-280 go to five instead of one or zero.

Exit list

Mileage is measured from the unconstructed western terminus at State Route 1 near Pacifica. The entire route is in San Mateo County.

Location	mi[4]	km	Exit[4]	Destinations	Notes
San Bruno	5.47	8.80	5	I-280 (Junipero Serra Freeway) – San Francisco, San Jose	Westbound exit and eastbound entrance; signed as exits 5A (north) and 5B (south); west end of I-380; I-280 north exit 43B, south exit 43A
	5.47	8.80	5C	SR 82 (El Camino Real) – San Bruno	Signed as exit 5 eastbound
	6.23– 6.37	10.03– 10.25	6	US 101 (Bayshore Freeway) – San Francisco International Airport, San Jose, San Francisco	Signed as exits 6A (south) and 6B (north) eastbound; US 101 exit 423B
South San Francisco	6.60	10.62	7	South Airport Boulevard	Eastbound exit and westbound entrance
	6.60	10.62		North Access Road	Eastbound exit and westbound entrance; east end of I-380
1.000 mi = 1.609 km; 1.000 km = 0.621 mi       Incomplete access

References

1. California Department of Transportation. "State Truck Route List". Sacramento: California Department of Transportation. Archived from the original (XLS file) on June 30, 2015. Retrieved June 30, 2015.
2. "CA Codes (shc:250-257)". Leginfo.ca.gov. Retrieved 2013-01-26.
3. "California codes 300-635".
4. Warring, KS (January 12, 2009 by). "Interstate 380 Freeway Interchanges" (PDF). California Numbered Exit Uniform System. California Department of Transportation. Retrieved September 1, 2014. Check date values in: |date= (help)

External links

Route map: Bing / Google

• Interstate 380 @ California Highways
• Interstate 380 @ AARoads.com
• Map of 1974 plan to extend the freeway to the west