Commonwealth Railways G class

Commonwealth Railways G class

Preserved G1 at the National Railway Museum in April 2014

Type and origin Power type Steam Builder Baldwin Locomotive Works (12) Clyde Engineering (4) Toowoomba Foundry (10) Build date 1914-17 Total produced 26 Number rebuilt 7

Specifications Configuration 4-6-0 Gauge 1,435 mm (4 ft 8 ^1⁄2 in) standard gauge Loco weight 106 long tons (108 t; 119 short tons) Fuel type Coal Water cap 4,850 imp gal (22,000 L; 5,820 US gal) Boiler pressure 160 psi (11 bar; 1,100 kPa) Cylinder size 20 in × 26 in (508 mm × 660 mm)

Performance figures Tractive effort 22,187 lbf (98.69 kN)

Career Operators Commonwealth Railways Numbers G1-G26 First run March 1914 Preserved G1 Current owner National Railway Museum Disposition 1 preserved, 25 scrapped

The Commonwealth Railways G class was a class of 4-6-0 tender locomotives of the Commonwealth Railways, Australia. The class operated on the 1,435 mm (4 ft 8 ¹⁄₂ in) Trans-Australian Railway.

History

G18 with the Trans-Australian Express, Cook, South Australia, 1935

In order to operate passenger trains on the then under construction Trans-Australian Railway, Commonwealth Railways ordered sixteen locomotives of the same design as the New South Wales Government Railways' P class (later the C32 class), but with higher capacity tenders.^[1][2]

Four were built by Clyde Engineering, Sydney and twelve by the Baldwin Locomotive Works, Philadelphia with all delivered between March and August 1914. A further ten were delivered by the Toowoomba Foundry between June 1916 and August 1917.^[1][2]

Initially they were used on construction trains, until the line opened in October 1917, when they commenced hauling passenger trains including the Trans Australian. Although just as successful as their New South Wales counterparts, the high mineral content of the water caused problems. Two were withdrawn in 1925 followed by a third in 1930.^[1]

In the 1930s, seven were fitted with superheated boliers to replace the saturated examples. These were reclassifed as the Ga class. Following their displacement by the larger C class locomotives in 1938, they were gradually withdrawn.^[1]

G9, c 1951

By the time dieselisation commenced in 1951, only eleven remained in service. Most were withdrawn in 1952 as the GM class diesels entered service. The last remained in service as a shunter at Port Pirie until withdrawn in September 1958.^[1]

One has been preserved and today is on display at the National Railway Museum, Port Adelaide. It is believed that although numbered G1, it was actually originally G2.^[2][3]

References

Notes

1. Oberg, Leon (1984). Locomotives of Australia 1850s-1980s. Frenchs Forest: Reed Books. p. 122. ISBN 0 730100 05 7.
2. G class Chris's Commonwealth Railways Pages
3. G-class 4-6-0 steam locomotive No.1 National Railway Museum

Bibliography

• Fluck, Ronald E; Marshall, Barry; Wilson, John (1996). Locomotives and Railcars of the Commonwealth Railways. Welland, SA: Gresley Publishing. ISBN 1876216018.

External links

Media related to Commonwealth Railways G class locomotives at Wikimedia Commons