Compression lift

The XB-70 had folding wingtips to enhance both compression lift and directional stability at high speeds.

In aerodynamics, compression lift refers to an aircraft that uses shock waves generated by its own supersonic flight to generate lift. This can lead to dramatic improvements in lift for supersonic/hypersonic aircraft. Clarence A. Syvertson and Alfred J. Eggers discovered this phenomenon in 1956 as they analyzed abnormalities at the reentry of nuclear warheads.[1]

The basic concept of compression lift is well known; "planing" boats reduce drag by "surfing" on their own bow wake in exactly the same fashion. Using this effect in aircraft is more difficult, however, because the "wake" is not generated until supersonic speeds are reached, and is highly angled. Aircraft have to be carefully shaped to take full advantage of this effect. In addition the angle of the shock waves varies greatly with speed, making it even more difficult to design a craft that gains significant lift over a wide range of speeds.

To date the only potential production aircraft that used compression lift has been the XB-70 in the 1960s, although with the cancellation of the program after only two prototypes had been built, it ended up being a testbed only. The compression lift decreased the induced drag of the XB-70 about 30%.[2]

Higher speed designs using compression lift, waveriders, remain an interesting possibility for hypersonic vehicle designs, although only testbed models have been flown.[1] The Boeing X-51 (WaveRider) also uses compression lift.

References

  1. 1 2 Compression Lift
  2. ↑ North American Rockwell, NASA-CR-115702, B-70 Aircraft Study Final Report, Vol.III, NASA, 1972. pp. III-233-236 25 MB

External links

This article is issued from Wikipedia - version of the 12/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.