CubCrafters CC19-180 XCub

CC19-180 XCub
Role Light aircraft
National origin United States
Manufacturer Cub Crafters
Introduction June 2016
Status In production (2016)
Number built 20 (July 2016)
Unit cost
US$297,500 (2016)
Developed from CubCrafters Carbon Cub EX

The CubCrafters CC19-180 XCub is an American light aircraft, designed and produced by CubCrafters of Yakima, Washington, introduced in June 2016. The aircraft is supplied complete and ready-to-fly.[1][2]

Development

The XCub is a development of the CubCrafters Carbon Cub EX, with higher performance and incorporating even more carbon fiber in the structure. It traces its linage to the 1949-vintage Piper PA-18 Super Cub design.[1][2]

The XCub was developed in secret over a six year period, 2010-2016, and was not publicly announced until Federal Aviation Administration (FAA) FAR 23 type certification had been completed. The certification process was completed using company internal resources and did not involve any venture capital, loans or customer deposits.[1][2]

Type certification for day and night visual flight rules was granted by the FAA on 2 June 2016.[3]

Design

The aircraft features a cantilever V-strut-braced high-wing, a two-seats-in-tandem enclosed cockpit accessed via doors, fixed aluminium sprung conventional landing gear and a single engine in tractor configuration.[1][2]

The aircraft is made from welded CNC-milled 4130 steel tubing, with its flying surfaces covered in doped aircraft fabric. Its 34.3 ft (10.5 m) span wing has an area of 174.8 sq ft (16.24 m2) and mounts flaps. The controls are driven by torque tubes, instead of cables, with the aileron tubes running inside the V-struts. The standard engine available is the 180 hp (134 kW) Lycoming O-360-C1 four-stroke powerplant, driving a Hartzell Trailblazer composite, constant speed propeller.[1][4]

The aircraft has an empty weight of 1,216 lb (552 kg) and a gross weight of 2,300 lb (1,000 kg), giving a useful load of 1,084 lb (492 kg).[4]

The take-off and landing distance required at maximum gross weight has been demonstrated as 170 ft (52 m).[4]

Operational history

In reviewing the aircraft in June 2016 after an evaluation flight, AOPA reviewer Dave Hirschman concluded, "the 153-mph true airspeed top speed in level flight is impressive, but what’s far more meaningful to backcountry pilots is the tremendous range and operational flexibility they’ll have at more economical cruise settings. At a true airspeed of 120 mph, for example, an XCub pilot can cut fuel burn to 6 gph or less and have about eight hours endurance from a full tank (50 gallons) of avgas. At a normal Super Cub cruise of 100 mph, the XCub can cover 1,000 statute miles...The XCub is exhilarating to fly and aesthetically appealing inside and out. The clever layout of the panel, passenger seating, and stowage compartments show it was built by people who know their customers and the features they value."[2]

In another June 2016 flight review, Paul Bertorelli of AVweb said, "The XCub has aluminum rather than steel or the Cub’s traditional bungee gear. This was a revelation for me because aluminum does a nice job of absorbing surplus touchdown energy; it’s far less energetic than steel or those blasted bungees in returning misdirected touchdown energy. This results in a unique feeling on touchdown. If you know you’re a little fast and you know you’re going to bounce, it’s just a small one and not the sharp-edged twang of steel or the slingshot of the bungees, but rather a firm pushback with no lateral wiggles at all. It’s quite confidence inducing because those small bounces don’t require the massive control inputs to arrest that a really bad spring-steel bounce would."[5]

At AirVenture in July 2016, the company announced that 20 XCubs had been sold.[6]

In a July 2016 review, Flying magazine writer Pia Bergqvist generally praised the aircraft, but found fault with the flap mechanism and resulting pitch changes with flap deployment. She wrote, "One thing that takes a bit of getting used to is the flap mechanism. Flaps are adjusted with a large handle in the upper left corner of the cockpit. The location of the handle makes it easy to access, and each flap setting is in a notch to prevent slippage. To get the first flap in position, you have to push slightly forward before grabbing the trigger to release the latch. For the second and third notches, however, you need to pull back before the handle will release. It took a few approaches to get used to the opposite action. The new slotted flap design allows for air from the underside of the wing to flow over the flap surface. With the additional lift, the pitch increases a great deal with each flap setting. [Company president Randy] Lervold advised me to fly with some nose-down trim before adding flaps. Without using that technique, retrimming was definitely required after each notch to prevent going too slow."[7]

Specifications (XCub)

Data from Manufacturer and FAA[3][4]

General characteristics

Performance

References

  1. 1 2 3 4 5 Bertorelli, Paul (5 June 2016). "Cub Crafters Rolls Out New XCub". AVweb. Retrieved 11 June 2016.
  2. 1 2 3 4 5 Hirschman, Dave (6 June 2016). "Backcountry surprise". AOPA. Retrieved 11 June 2016.
  3. 1 2 Federal Aviation Administration (2 June 2016). "Type Certificate Data Sheet No. A00053SE" (PDF). Retrieved 11 June 2016.
  4. 1 2 3 4 Cub Crafters. "Specifications - XCub". xcub.com. Retrieved 12 June 2016.
  5. ↑ Bertorelli, Paul (11 June 2016). "I'm Not Really A Cub Guy". AVweb. Retrieved 13 June 2016.
  6. ↑ AVweb Staff (26 July 2016). "Cub Crafters Sells 20 XCubs, Announces Factory Training". AVweb. Retrieved 27 July 2016.
  7. ↑ Bergqvist, Pia (22 July 2016). "The CubCrafters XCub Is an Ideal Backcountry Machine". Flying magazine. Retrieved 28 July 2016.

External links

This article is issued from Wikipedia - version of the 7/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.