D-ring

A) D-ring (shown in isometric view) B) Weld-on pivot link; note the fillet weld call-out (bottom-right).

A D-ring is an item of hardware, usually a tie-down metal ring shaped like the letter D used primarily as a lashing point.

The term is found interchangeably spelled in different forms, such as: Dring, d-ring or even Dee-ring.

A D-ring may be used at the end of a leather or fabric strap, or may be secured to a surface with a metal or fabric strap; though there are D-rings with a middle body designed to be welded to steel. Ideally, a D-ring swings freely after it has been secured. D-rings may vary in composition, geometry, weight, finish and load (rated) capacity. Though there are differences, a weld-on pivoting link is commonly called a D-ring.

To minimize obstruction when the D-ring is not in use, recessed tie-down rings are designed that accommodate the D-ring so it is flush to the surface. There are some non-recessed designs that have an adhesive base. The corresponding work load limits (WLL) must not be exceeded.

Lashing points and disambiguation of the term

Applications of D-rings include:

A D-ring held by a strap, used to secure cargo in a vehicle.

References


This article is issued from Wikipedia - version of the 11/22/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.