Bavarian PtL 2/2

The Class PtL 2/2 locomotives of the Royal Bavarian State Railways (Königlich Bayerische Staatseisenbahn) were light and very compact superheated steam locomotives for operation on Bavarian branch lines (known generally as Lokalbahnen). There were three types in total, of which two were transferred to the Deutsche Reichsbahn-Gesellschaft as Class 98.3 tank locomotives and even survived to join the Deutsche Bundesbahn fleet after the Second World War.

Common to all the variants was the B axle arrangement (European or UIC classification) or 0-4-0 (Whyte notation), the semi-automatic, gravity-feed firing that enabled one-man operation, and platforms with guard rails, front and rear, that enabled safe access to the coaches. The locomotives had a large driver's cab with 3 windows per side that surrounded the entire locomotive boiler as far as the smokebox. This unique feature earned it the nickname Glaskasten ("glass box") or, in Franconia, Glas-Chaise ("glass chair").[1]

1905 version

Bavarian PtL 2/2 (1905 version)
Number(s) 4501–4506
Quantity 6
Manufacturer Krauss
Year(s) of manufacture 1905–1906
Retired 1923
Wheel arrangement 0-4-0
Axle arrangement B h2t
Length over buffers 7,004 mm
Service weight 21.3 t
Adhesive weight 21.3 t
Axle load 10.6 t
Top speed 50 km/h
Driving wheel diameter 1,006 mm
LP cylinder bore 305 mm
HP cylinder bore 365 mm
Piston stroke 400 mm
Boiler Overpressure 12 bar
Grate area 0.60 m²
Evaporative heating area 37.00 m³
Brakes Druckluftbremse

In both 1905 and 1906 Krauss supplied three locomotives (numbers 4501–4506) with an inside driving gear arranged inside the frame and between the axles. The three machines built in 1906 had their cylinder diameter increased from 285 to 305 mm. The two axles were driven via a jackshaft and external connecting rods. Unlike the better-known later variants the water tank of this 'ancient glass box' (Ur-Glaskasten) was arranged over the gangway, but in such a way that crossing over to the coaches in the train was still possible.

A rival design for this locomotive was the Bavarian ML 2/2 that was built by Maffei.

In the Reichsbahn's provisional renumbering plan of 1923, all six locomotives were included as numbers 98 301 - 98 306; they were however taken out of service in the same year. The reason for that was the difficulty of accessing the inside driving gear for maintenance work.

1908 and 1911 versions

Number 98 307, the Glaskasten at the DDM.
Bavarian PtL 2/2 (1908–1914 version)
DRG Class 98.3
ÖBB 688.01
Number(s) 4507–4535
DRG 98 301–322
Quantity 42
Manufacturer Krauss
Year(s) of manufacture 1908–1914
Retired 1963
Wheel arrangement 0-4-0
Axle arrangement B h2t
Length over buffers 7,004/6,800 mm
Service weight 22.7/22.1 t
Adhesive weight 22.7/22.1 t
Axle load 13.5/11.0 t
Top speed 50 km/h
Indicated Power 155 kW
Driving wheel diameter 1,006 mm
Cylinder bore 320 mm
Piston stroke 400 mm
Boiler Overpressure 12 bar
Grate area 0.60 m²
Evaporative heating area 28.90 m²
Brakes compressed air

In 1908 and 1909 Krauss supplied 29 locomotives with a conventional outside driving gear, which nevertheless used a jack shaft between the main axles. They were given locomotive numbers 4507 - 4535. This driving gear enabled the water tank to be located below the boiler in the frame, so that there was more space on the gangways.

Three further locomotives of this type were procured by the Prussian state railways in 1910 and were designated as the Prussian Class T 2.

In 1911 and 1914 two further batches of nine and four locomotives were supplied to the Royal Bavarian State Railways. On these, the jackshaft was left out and the wheelbase reduced from 3,200 mm to 2,700 mm. These engines were also shorter overall and lighter than the versions built up to 1909.

The Deutsche Reichsbahn-Gesellschaft took over 22 locomotives, numbering them 98 301 - 98 322. Nine of these came from the first series with the jackshaft.

Survivors

Two locomotives were sold to industrial firms in 1942, one was a victim of the Second World War and the engine number 98 304 stayed in Austria after the war. It was designated as Class ÖBB 688.01 by the Austrian Federal Railways (Österreichische Bundesbahn). This engine was taken out of service in 1959.

The remaining locomotives entered the Deutsche Bundesbahn, and were mostly withdrawn during the 1950s. Number 98 307 was deployed until 1963 between Spalt and Georgensgmünd and was known as the 'Spalter Goat' (Spalter Bockel). It has been preserved and is kept at the German Steam Locomotive Museum (Deutsches Dampflokomotiv-Museum or DDM) in Neuenmarkt-Wirsberg on loan from the Nuremberg Transport Museum (Verkehrsmuseum Nürnberg), but is no longer working.

4515

A second engine, numbered "4515", had been cut in cross-section to explain the internal workings of a steam locomotive. It was an unfortunate victim of the great fire at the Nuremberg Shed in October 2005, but after a successful renovation is now displayed in the DB Museum, Koblenz.[2]

98 321

In 1938 locomotive no. 98 321 went via a locomotive dealer and the Lower Saxon State Railway Office to the Verden-Walsrode Railway. They had it modified in 1947 at Krupp's: the armatures were moved to the rear of the outer firebox and housed in a normal driver's cab; gravity-fed firing was converted to normal firing with a firebox door. This work was completed in 1950 in Verden, before it went into service as locomotive no. 298. On the running plate, two former air cylinders were mounted as additional water tanks. Its period of duty was short, however. By early 1956 the locomotive was taken out of service and sold to a scrap merchant.

References

  1. Robert Zintl: Das Thurnauer Bockela, Verlag E.C. Baumann, Kulmbach 1980, ISBN 3-922091-15-6, p. 80
  2. DB-Museum Koblenz, retrieved 28 January 2014

External links

This article is issued from Wikipedia - version of the 9/12/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.