Dimethyl terephthalate

Dimethyl terephthalate
Names
Preferred IUPAC name
Dimethyl benzene-1,4-dicarboxylate
Other names
Dimethyl terephthalate
1,4-Benzenedicarboxylic acid dimethyl ester
Dimethyl 4-phthalate
Dimethyl p-phthalate
Di-Me terephthalate
Methyl 4-carbomethoxybenzoate
Methyl-p-(methoxycarbonyl)benzoate
Methyl terephthalate
Terephthalic acid methyl ester
Identifiers
120-61-6 YesY
3D model (Jmol) Interactive image
Interactive image
Abbreviations DMT
1107185
ChemSpider 13863300 YesY
ECHA InfoCard 100.004.011
EC Number 204-411-8
MeSH Dimethyl+4-phthalate
PubChem 8441
12241382 (2H4)
RTECS number WZ1225000
Properties
C10H10O4
Molar mass 194.19 g·mol−1
Appearance white solid
Density 1.2 g/cm3, ?
Melting point 142 °C (288 °F; 415 K)
Boiling point 288 °C (550 °F; 561 K)
Acidity (pKa) -7.21
Basicity (pKb) -6.60
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Dimethyl terephthalate (DMT) is an organic compound with the formula C6H4(CO2CH3)2. It is the diester formed from terephthalic acid and methanol. It is a white solid that melts to give a distillable colourless liquid.[1]

Production

Dimethyl terephthalate (DMT) has been produced in a number of ways. Conventionally and still of commercial value is the direct esterification of terephthalic acid. Alternatively, it can be prepared by alternating oxidation and methyl-esterification steps from p-xylene via methylp-toluate.[1]

Dimethyl Terephthalate (DMT) (Witten Process)

The common method for the production of DMT from para-xylene (PX) and methanol consists of four major steps: oxidation, esterification, distillation, and crystallization. A mixture of p-xylene (PX) and p-Toluic ester (PT) is oxidized with air in the presence of a heavy metal catalyst (Co/Mn). The acid mixture resulting from the oxidation is esterified with methanol (MeOH, CH3OH) to produce a mixture of esters. The crude ester mixture is distilled to remove all the heavy boilers and residue produced; the lighter esters are recycled to the oxidation section. The raw DMT is then sent to the crystallization section to remove DMT isomers, residual acids and aromatic aldehydes.[2]


2) Esterification of the resulting acid with methanol results in Methyl p-toluate at 250⁰C and 2500 kPa and subsequent oxidation and esterification of Methyl p-toluate yields Dimethyl terephthalate (DMT) as shown in the below reaction:[1]

Dimethyl Terephthalate (DMT) production through Direct Esterification

If highly impure Terephthalic acid is available, DMT can be made in a separate process by esterification with methanol to dimethyl terephthalate which is then purified by distillation:

C8H6O4 (TPA) + 2CH3OH (Methanol) → C10H10O4 (DMT) + 2 H2O

at presence of o-xylene at 250–300 ⁰C.

Use

DMT is used in the production of polyesters, including polyethylene terephthalate (PET), polytrimethylene terephthalate (PTT), and polybutylene terephthalate (PBT). It consists of benzene substituted with carboxymethyl groups (CO2CH3) at the 1 and 4 positions. Because DMT is volatile, it is an intermediate in some schemes for the recycling of PET, e.g. from plastic bottles.

Hydrogenation of DMT affords the diol cyclohexanedimethanol, which is a useful monomer.

References

  1. 1 2 3 Richard J. Sheehan "Terephthalic Acid, Dimethyl Terephthalate, and Isophthalic Acid" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005.doi:10.1002/14356007.a26_193
  2. ↑ http://www.gtctech.com/technology-licensing/polyester-technologies/dimethyl-terephthalate-technology/
This article is issued from Wikipedia - version of the 9/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.