Direct flight

For the flight mechanism in insects, see Insect flight § Direct flight.

A direct flight in the aviation industry is any flight between two points by an airline with no change in flight numbers, which may include a stop at an intermediate point.[1] The stop over may either be to get new passengers (or allow some to disembark) or a mere technical stop over (i.e., for refuelling). Direct flights are often confused with non-stop flights, which are flights involving no intermediate stops.[2] When there is a change in flight number, the subsequent flight is referred to as a connecting flight.

General aspects

The term "direct flight" is not legally defined in the United States,[3] but since the 1970s the Official Airline Guides have defined the term simply as a flight(s) with a single flight number.[3] (In earlier years "direct" in the OAG did mean "no plane change".) While so-called "direct" flights may thus involve changes in aircraft (a "change of gauge"), or even airline[3] at the intermediate point, they are typically—but not always—differentiated from "connecting flights" in that the airline will enforce a dependency between multiple legs of the flight, so that leg two cannot operate if leg one has failed to arrive at the departure airport. Direct flights involving aircraft changes typically change to planes at adjoining or nearby gates.[3]

Airlines, airports, and security authorities in a particular country enforce different policies on whether passengers may stay on the aircraft on routes which do not involve a change of aircraft. For example, flights that require stopover merely for refuelling usually do not permit passengers to disembark from the aircraft. On the other hand, flights where there is a change of passengers may require that passengers disembark and stay at a holding area for security reasons and a proper headcount. In relation to this, a direct flight with stopovers may or may not involve a change in the flight crew.

Airlines may also market connections to a consolidation airport, usually an airline hub, where the continuation of the flight from multiple aircraft is to a single aircraft listed under several flight numbers. Unlike traditional direct flights, multiple legs of such 'direct' flight actually operate as individual/independent legs, such that the latter leg can operate without any dependency or consideration of the former leg. In other words, the flight that comprises the latter leg can depart even if the flight that comprised the former leg failed to arrive.

See also

References

  1. ↑ "What's the difference between nonstop and direct flights?". Retrieved 2008-03-21.
  2. ↑ Collis, Roger (2008-01-31). "Q & A: 'Direct' or 'nonstop' flight? Beware the difference". The New York Times. Retrieved 2008-03-21.
  3. 1 2 3 4 Wade, Betsy (1992-09-20). "Understanding Travelspeak". New York Times. Retrieved 2006-07-20.
This article is issued from Wikipedia - version of the 11/12/2014. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.