Fader creep

Fader creep is a colloquial term used in audio recording to describe a tendency for sound engineers to raise the volume of individual channels on an audio mixer, rather than lowering others to achieve the desired change in the mix.

Results of creeping

As a result, the faders (potentiometers that operate by sliding up or down) or volume controls (rotary potentiometers) on the mixing board or audio processor gradually "creep" toward the maximum volume setting, which reduces the ability to manipulate the relative volumes between channels. It can also result in clipping or distortion of the master mix, which is when the overall volume of sound is too great for the equipment or recording medium intended to hold it.

Multi track problems with creep

Fader creep can be a particular problem in audio mixing sessions for multi-track recordings, where individual sounds held on separate audio tracks, or delivered by outboard MIDI or computer audio equipment are combined into the final stereo presentation of the recording. For example, an engineer might compensate for a particularly loud drum track by raising the volumes of the voice, the guitar, and the piano to the point where all of the individual signals are competing for headroom. A better solution is to lower the volume of the drums, and adjust the other channels accordingly.

Live concert creep

In audio mixing for live concerts, fader creep can result when ear fatigue (the diminishing of the ability for the human ear to hear clearly after prolonged exposure to loud sounds) reduces the ability of the sound engineer to hear the individual components of the mix (i.e. separate instruments and voices on the stage) accurately.