Goodwin Buckshot
| Buckshot | |
|---|---|
| Role | Powered parachute |
| National origin | United States |
| Manufacturer | FL Goodwin |
| Introduction | 1998 |
| Status | Production completed |
| Unit cost |
US$9000 (2001) |
The Goodwin Buckshot is an American powered parachute that was designed and produced by FL Goodwin of Phoenix, Arizona and introduced in 1998.[1]
The aircraft was distributed by Paraborne Aviation of Kissimmee, Florida.[1] The Buckshot is out of production.
Design and development
The aircraft was designed as a US FAR 103 Ultralight Vehicles two-seat trainer. It features a parachute-style high-wing, two seats in side-by-side configuration, tricycle landing gear and a single engine in pusher configuration. The standard engines supplied were the 45 hp (34 kW) 2si 460F-45 and the 45 hp (34 kW) Zenoah G-50 engine, although any light two-cylinder, two-stroke engine can be used.[1]
The aircraft is built from bolted-together anodized aluminum tubing to save weight. Inflight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has tiller-controlled nosewheel steering. The main landing gear does not incorporate suspension and the aircraft relies on large tundra tires to provide this.[1]
Specifications (Buckshot)
Data from Cliche[1]
General characteristics
- Crew: one
- Capacity: one passenger
- Empty weight: 230 lb (104 kg)
- Fuel capacity: 13.5 U.S. gallons (51 L; 11.2 imp gal)
- Powerplant: 1 × 2si 460F-45 twin cylinder, two-stroke, air-cooled aircraft engine, 45 hp (34 kW)
Performance
- Cruise speed: 25 mph (22 kn; 40 km/h)