Hybrid Memory Cube

Hybrid Memory Cube (HMC) is a high-performance RAM interface for through-silicon vias (TSV)-based stacked DRAM memory competing with the incompatible rival interface High Bandwidth Memory (HBM).

Overview

Hybrid Memory Cube was announced by Micron Technology in 2011[1] and promises a 15 times speed improvement over DDR3.[2] The Hybrid Memory Cube Consortium (HMCC) is backed by several major technology companies including Samsung, Micron Technology, Open-Silicon, ARM, HP(since withdrawn), Microsoft(since withdrawn), Altera, and Xilinx.[3][4]

HMC combines through-silicon vias (TSV) and microbumps to connect multiple (currently 4 to 8) dies of memory cell arrays on top of each other.[5] The memory controller is integrated as a separate die.[1]

HMC uses standard DRAM cells but it has more data banks than classic DRAM memory of the same size. The HMC interface is incompatible with current DDRn (DDR2 or DDR3) and competing High Bandwidth Memory implementations.[6]

HMC technology won the Best New Technology award from The Linley Group (publisher of Microprocessor Report magazine) in 2011.[7][8]

The first public specification, HMC 1.0, was published in April 2013.[9] According to it, the HMC uses 16-lane or 8-lane (half size) full-duplex differential serial links, with each lane having 10, 12.5 or 15 Gbit/s SerDes.[10] Each HMC package is named a cube, and they can be chained in a network of up to 8 cubes with cube-to-cube links and some cubes using their links as pass-through links.[11] A typical cube package with 4 links has 896 BGA pins and a size of 31x31x3.8 millimeters.[12]

The typical raw bandwidth of a single 16-lane link with 10 Gbit/s signalling implies a total bandwidth of all 16 lanes of 40 GB/s (20 GB/s transmit and 20 GB/s receive); cubes with 4 and 8 links are planned, though the HMC 1.0 spec limits link speed to 10 Gbit/s in the 8-link case. Therefore, a 4-link cube can reach 240 GB/s memory bandwidth (120 GB/s each direction using 15 Gbit/s SerDes), while an 8-link cube can reach 320 GB/s bandwidth (160 GB/s each direction using 10 Gbit/s SerDes).[13] Effective memory bandwidth utilization varies from 33% to 50% for smallest packets of 32 bytes; and from 45% to 85% for 128 byte packets.[5]

As reported at the HotChips 23 conference in 2011, the first generation of HMC demonstration cubes with four 50 nm DRAM memory dies and one 90 nm logic die with total capacity of 512 MB and size 27x27 mm had power consumption of 11 W and was powered with 1.2 V.[5]

Engineering samples of second generation HMC memory chips were shipped in September 2013 by Micron.[2] Samples of 2 GB HMC (stack of 4 memory dies, each of 4 Gbit) are packed in a 31×31 mm package and have 4 HMC links. Other samples from 2013 have only two HMC links and a smaller package: 16×19.5 mm.[14]

The second version of the HMC specification was published on 18 November 2014 by HMCC.[15] HMC2 offers a variety of SerDes rates ranging from 12.5 Gbit/s to 30 Gbit/s, yielding an aggregate link bandwidth of 480 GB/s (240 GB/s each direction), though promising only a total DRAM bandwidth of 320 GB/sec.[16] A package may have either 2 or 4 links (down from the 4 or 8 in HMC1), and a quarter-width option is added using 4 lanes.

The first processor to use HMCs was the Fujitsu SPARC64 XIfx,[17] which is used in the Fujitsu PRIMEHPC FX100 supercomputer introduced in 2015.

JEDEC's Wide I/O and Wide I/O 2 are seen as the mobile computing counterparts to the desktop/server-oriented HMC in that both involve 3D die stacks.[18]

See also

References

  1. 1 2 Micron Reinvents DRAM Memory // Linley group, Jag Bolaria, 12 September 2011
  2. 1 2 Mearian, Lucas (2013-09-25). "Micron ships Hybrid Memory Cube that boosts DRAM 15X". computerworld.com. Computerworld. Retrieved 2014-11-04.
  3. ↑ Microsoft backs Hybrid Memory Cube tech // by Gareth Halfacree, bit-tech, 9 May 2012
  4. ↑ http://www.hybridmemorycube.org/about.html
  5. 1 2 3 Hybrid Memory Cube (HMC), J. Thomas Pawlowski (Micron) // HotChips 23
  6. ↑ Memory for Exascale and ... Micron's new memory component is called HMC: Hybrid Memory Cube by Dave Resnick (Sandia National Laboratories) // 2011 Workshop on Architectures I: Exascale and Beyond, 8 July 2011
  7. ↑ Micron's Hybrid Memory Cubes win tech award // by Gareth Halfacree, bit-tech, 27 January 2012
  8. ↑ Best Processor Technology of 2011 // The Linley Group, Tom Halfhill, 23 Jan 2012
  9. ↑ Hybrid Memory Cube receives its finished spec, promises up to 320GB per second By Jon Fingas // Engadget, 3 April 2013
  10. ↑ HMC 1.0 Specification, Chapter "1 HMC Architecture"
  11. ↑ HMC 1.0 Specification, Chapter "5 Chaining"
  12. ↑ HMC 1.0 Specification, Chapter "19 Packages for HMC-15G-SR Devices"
  13. ↑ "Hybrid Memory Cube Specification 1.0" (PDF). HMC Consortium. 2013-01-01. Retrieved 2016-08-10.
  14. ↑ Hruska, Joel (25 September 2013). "Hybrid Memory Cube 160GB/sec RAM starts shipping: Is this the technology that finally kills DDR RAM?". Extreme Tech. Retrieved 27 September 2013.
  15. ↑ Hybrid Memory Cube Consortium Advances Hybrid Memory Cube Performance and Industry Adoption With Release of New Specification, 18 November 2014
  16. ↑ "Hybrid Memory Cube Specification 2.1" (PDF). HMC Consortium. 2015-11-05. Retrieved 2016-08-10.
  17. ↑ Halfhill, Tom R. (22 September 2014). "Sparc64 XIfx Uses Memory Cubes". Microprocessor Report.
  18. ↑ Goering, Richard (2013-08-06). "Wide I/O 2, Hybrid Memory Cube (HMC) – Memory Models Advance 3D-IC Standards". cadence.com. Cadence Design Systems. Retrieved 2014-12-08.
This article is issued from Wikipedia - version of the 9/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.