Intelligent Home Control

Intelligent House Concept is a building automation system using a star configured topology with wires to each device. Originally made by LK, but now owned by Schneider Electric and sold as "IHC Intelligent House Concept".

The system is made up of a central controller and up to 8 input modules and 16 output modules. Each input module can have 16 digital (on/off) inputs and each output module 8 digital (on/off) outputs, resulting in a total of 128 input and 128 outputs per controller.

Module control protocol

IHC input module protocol, input 2 on

The central controller has one point-to-point data communication wire connected to each module. The protocol between the central controller and the modules uses a 5V pulse width encoding as follows:

A header that is 4100µs high and 300µs low
One pulse per I/O port, i.e. 16 pulses for input modules and 8 pulses for output modules
One addition parity pulse; an even number of pulses is 0 parity and odd number pulses is 1 parity
The pulse width is 600µs
A 0 (input or output off, or even parity) is encoded as 300µs high and 300µs low
A 1 (input or output on, or odd parity) is encoded as 150µs high and 450µs low

The above signal constantly repeats.

References

http://www.lk.dk/Lauritz+Knudsen/privat/det-intelligente-hjem/Fakta-om-IHC-familien.page?

This article is issued from Wikipedia - version of the 7/31/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.