Daewoo Telecom K7

Daewoo Telecom K7

Daewoo Precision Industries K7 on display
Type Submachine gun
Place of origin Republic of Korea
Service history
In service 2001-present
Used by See Users
Production history
Designer Agency for Defense Development
Daewoo Telecom
Designed 1998-2000
Manufacturer Daewoo Telecom
Unit cost ₩ 2,800,000
Produced 2001-present
Variants None
Specifications
Weight 3.38 kg
Length 610 mm (stock retracted)
790 mm (stock extended)
Barrel length n/a

Cartridge 9×19mm Parabellum
Caliber 9mm
Action Blowback
Rate of fire 1,100 rounds/min
Effective firing range 150 m
Feed system 30-round (30-round magazines can also be used from Uzi or 32-round magazines from Beretta PM12s)
Sights Iron sights

The Daewoo Telecom K7 is a 9×19mm Parabellum submachine gun with an integral suppressor used by the Republic of Korea Armed Forces. It is based on the Daewoo K1A submachine gun, but is simplified by utilizing a blowback action rather than the gas impingement system of its parent firearm. It was first displayed outside of Korea in the United Arab Emirates at the IDEX (International Defence Exhibition) 2003 convention.

The K7 is currently manufactured by S&T Daewoo.[1]

Design

Despite the fact that the H&K MP5SD6 was already in service with the Republic of Korea Armed Forces by the time the K7 reached production status, most of the special forces relied on unconventional weapons during covert operations due to high price of imported and domestically produced SMGs, more specifically, silenced SMGs. Due to the substantial cost of the importation and production of such weapons, the Republic of Korea Army Special Warfare Command requested the development of a silenced submachine gun that would be less expensive to import or manufacture than the MP5SD6. The Defense Agency for Technology and Quality, a part of the Agency for Defense Development, and Daewoo Telecom, a subbranch of Daewoo Group, officially started development in April 1998, finishing the project in December 2000.

Due to the fact that the K7 was developed from the Daewoo K1A, the K7 features parts that can be interchanged with those of the K1 and vice versa.

As the K7 uses subsonic ammunition (9×19mm), there is little need for the weapon to use the direct gas impingement system of the K1A. Instead, the K7 utilizes a simple blow-back system. A 30-round vertical box magazine is used and it can also use the 30-round magazines taken from the IMI Uzi or 32-round magazines from the Beretta Model 12. As the magazine well of the K1A was retained, there are internal accommodations for the smaller 9 mm magazine. There are 3 firing modes, single shot, a 3-round burst and fully automatic. However, prolonged fully automatic fire has been shown to damage and degrade the baffles within the integral suppressor. As a result of the light bolt, a cyclic rate of fire of 1150-rounds per minute is achieved.

The K7's upper receiver is based on that of the K2, albeit slightly modified.[2] The hammer/fire control unit and telescopic stock are also derived from those of the K1.[2]

Suppressor

The suppressor reduces the pressure of the gas produced during discharge, and by extension, reduces the amount of noise generated. In addition, the suppressor significantly distorts the sound of the gunshot so that it is incredibly difficult to pinpoint the location of the shooter. Per shot, the mean average of noise generated by the K7 is approximately 111.5 dB.[2]

Users

See also

References

External links

This article is issued from Wikipedia - version of the 6/25/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.