Karosa B 951

Karosa B951

Karosa B951 no.4039 from 2002 of Prague transport company
Overview
Manufacturer Karosa
Body and chassis
Doors 3, air-operated
Floor type High-floor
Chassis semi-self-supporting with frame
Powertrain
Engine Iveco Cursor 8 Euro III V6 Diesel engine
Power output 210 kW (282 hp)
Transmission Voith DIWA 3-speed automatic
Dimensions
Length 11,320 mm (445.7 in)
Width 2,500 mm (98.4 in)
Height 3,165 mm (124.6 in)
Curb weight 10,200 kg (22,500 lb)
Chronology
Predecessor Karosa B 931
Successor Irisbus Citelis
Karosa B 951 E in Lubin, Poland

Karosa B 951 is an urban bus produced by bus manufacturer Karosa from the Czech Republic, in the years of 2002 to 2006. Modernised version B951E was introduced in 2003.

Construction features

Karosa B 951 is model of Karosa 900 series. B 951 is unified with city bus models such as B 952 and B 961. Body was assembled to the skeleton, which has undergone a dip stage, sheets were galvanized and painted and then to have it installed additional components. Body is semi-self-supporting with frame and engine with automatic gearbox is placed in the rear part. Only rear axle is propulsed. Front and rear axles are solid. All axles are mounted on air suspension. On the right side are three doors (first are narrower than middle doors). Inside are used plastic Vogelsitze or Ster seats. Drivers cab is separated from the rest of the vehicle with glazed partition. In the middle part is room for a pram or wheelchair.

Production and operation

In 2002 started serial production, which continued until 2006. Since 2003 were buses produced only modernised version B 951 E, which had glass glued to skeleton, instead of glass mounted in rubber and better ventilation of the engine compartment.

Historical vehicles

Any historical vehicle was not saved yet.

See also

Wikimedia Commons has media related to Karosa B 951.
This article is issued from Wikipedia - version of the 9/15/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.