LSAT caseless ammunition

This article is about the caseless ammunition of the LSAT program. For the LSAT Program, see Lightweight Small Arms Technologies.

LSAT caseless ammunition is caseless ammunition produced as part of the U.S. Army’s Lightweight Small Arms Technologies (LSAT) program.

Although less advanced in development than the other ammunition component of the program, the caseless round has already produced significant results. Having replicated Dynamit Nobel's ACR ammunition, the HITP (High Ignition Temperature Propellant, which is hexogen/octogen-based to decrease heat sensitivity) ammunition was modified to a 5.56 mm round. Tests proved the ammunition's usability, and development of the weapon was advanced using knowledge gained from the cased version.

History

The Alliant Techsystems ammunition production team cut production time and costs by reducing from fourteen to two the number of steps used to complete processing.[1] The second spiral of caseless ammunition was rolled out in 2008, with the necessary facilities to produce the ammunition in bulk completed.[2] It reduced the weight and volume of standard ammunition (by 51% and 40%, respectively), and it neared Technology Readiness Level 5. The development of the third spiral was initiated, with the goal of developing a cheaper and more environmentally friendly binder.[2] It also aimed to reduce heat ablation on the inside of the weapon by modifying the propellant's burn rate, and by giving the round an exterior coating to absorb or prevent transferred heat.[2]

Caseless ammunition also produces no ejected shells (which both improves the weapon's protection from dirt and removes any need to "police" cases after firing).

In August 2013, AAI Corporation was awarded a $2.05 million contract to continue developing parts of the LSAT program. Part of the contract is to refine 5.56 mm caseless ammunition prototypes for testing. The caseless ammunition effort will focus on improving propellant and ignition formulations in a 5.56 mm configuration.[3]

See also

References

  1. ↑ Spiegel, Kori; Paul Shipley (2006-05-16). "Lightweight Small Arms Technologies" (PDF). International Infantry & Joint Services Small Arms Systems Symposium. National Defense Industrial Association.
  2. 1 2 3 Spiegel, Kori; Paul Shipley (2008-05-21). "Lightweight Small Arms Technologies" (PDF). International Infantry & Joint Services Small Arms Systems Symposium. National Defense Industrial Association.
  3. ↑ AAI Awarded $2.05 Million Contract for Continued Lightweight Small Arms Technologies Development - AAICorp press release, 6 August 2013
This article is issued from Wikipedia - version of the 2/17/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.