Jorge Cepernic Dam

Jorge Cepernic Dam
Location of Jorge Cepernic Dam in Argentina
Country Argentina
Location Puerto Santa Cruz, Santa Cruz Province
Coordinates 50°11′31.76″S 70°7′14.64″W / 50.1921556°S 70.1207333°W / -50.1921556; -70.1207333Coordinates: 50°11′31.76″S 70°7′14.64″W / 50.1921556°S 70.1207333°W / -50.1921556; -70.1207333
Purpose Power
Status Under construction
Construction began July 2015
Dam and spillways
Type of dam Embankment, concrete-face rock-fill
Impounds Santa Cruz River
Height 43.5 m (143 ft)
Length 2,900 m (9,500 ft)
Dam volume 6,900,000 m3 (9,000,000 cu yd)
Reservoir
Total capacity 2,720,000,000 m3 (2,210,000 acre·ft)
Surface area 198 km2 (76 sq mi)
Power station
Hydraulic head 34.65 m (113.7 ft)
Turbines 5 x 120 MW Kaplan-type
Installed capacity 600 MW
Annual generation 1,866 GWh (estimate)

The Jorge Cepernic Dam, formerly known as La Barrancosa Dam, is a concrete-face rock-fill dam being built on the Santa Cruz River about 115 km (71 mi) west of Puerto Santa Cruz in Santa Cruz Province, Argentina. It is named after the former governor of Santa Cruz Jorge Cepernic. A consortium led by China's Gezhouba Group was awarded the contract to build the Jorge Cepernic Dam and the Néstor Kirchner Dam upstream in August 2013. The consortium will also fund the construction. Both dams are expected to cost nearly US$4.8 billion.[1] It will be built by the firm Electroingeniería, led by Osvaldo Acosta and Gerardo Ferreyra.[2] The primary purpose of the dam is hydroelectric power generation and its power station will have an installed capacity of 600 MW.[3]

In July 2015 machines arrived in Santa Cruz for the construction of the dams.[4]

References

This article is issued from Wikipedia - version of the 10/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.