Martin Dam

Martin Dam
Location of Martin Dam in Alabama
Country United States
Location Elmore / Tallapoosa counties, near Dadeville, Alabama
Coordinates 32°40′49″N 85°54′39″W / 32.68028°N 85.91083°W / 32.68028; -85.91083Coordinates: 32°40′49″N 85°54′39″W / 32.68028°N 85.91083°W / 32.68028; -85.91083
Construction began 1923
Opening date 1926
Dam and spillways
Type of dam Concrete arch-gravity
Impounds Tallapoosa River
Height 168 ft (51 m)[1]
Length 2,000 ft (610 m)[1]
Dam volume 431,000 cu yd (330,000 m3)[1]
Spillways 20x gated overflow
Spillway capacity 134,000 cu ft/s (3,800 m3/s)[1]
Reservoir
Creates Lake Martin
Total capacity 1,622,000 acre·ft (2.001×109 m3)[2]
Catchment area 2,984 sq mi (7,730 km2)[2]
Surface area 39,180 acres (15,860 ha)[2]
Normal elevation 490 ft (150 m)[2] (max)
Power station
Hydraulic head 145 ft (44 m)
Turbines 4x Francis
Installed capacity 182.5 MW[1]
Annual generation 327 million KWh

Martin Dam is a concrete arch gravity dam on the Tallapoosa River in Alabama in the United States, about 10 miles (16 km) southwest of Dadeville. Impounding the 40,000-acre (16,000 ha) Lake Martin, the dam was built in the 1920s to provide flood control, hydroelectric power generation and water supply. Originally known as the Cherokee Bluffs dam, the dam is named in honor of Thomas Wesley Martin, president of the Alabama Power Company during the dam's construction.[3]

Preparations for construction of Martin Dam began in 1916 as Alabama Power began to purchase lands that would be flooded by its construction. Actual work on the dam commenced in 1923 and was completed in 1926; the lake filled to capacity for the first time on April 23, 1928 after heavy upstream flooding. However, the dam was not officially dedicated until 1936.[4] At the time of completion, Lake Martin was the largest man-made body of water in the world.[5] Filling the reservoir submerged the towns of Sousanna and Benson as well as many historic Native American sites.[4]

The dam is 168 feet (51 m) high and 2,000 feet (610 m) long, straddling the border of Tallapoosa and Elmore Counties with the powerhouse located on the Elmore (west) side. The spillway is controlled by twenty 30 ft (9.1 m) x 16 ft (4.9 m) gates and has a total discharge capacity of 134,000 cubic feet per second (3,800 m3/s).[1] At its full capacity of 1,622,000 acre·ft (2.001×109 m3), Lake Martin stretches over 30 miles (48 km) up the Tallapoosa River. The lake is drawn down by an average of 10 feet (3.0 m) each winter to facilitate flood control operations at Martin Dam.[2]

Martin Dam's powerhouse contained three Francis turbines upon its original construction in 1927, with capacities of 45.8, 41 and 40.5 megawatts (MW). A fourth generator with a capacity of 55.2 MW was incorporated in 1952, bringing the total generating capacity to 182.5 MW.[1] The power plant generates over 327 million KWh each year.[4]

See also

References

  1. 1 2 3 4 5 6 7 "Martin Dam Fact Sheet". Alabama Power. Retrieved 2012-05-08.
  2. 1 2 3 4 5 "Lake Martin Statistics". Lakes Online. Retrieved 2012-05-08.
  3. "Martin Dam". Alabama Power. Retrieved 2012-05-08.
  4. 1 2 3 "Lake Martin and the Thomas Wesley Martin Dam". Encyclopedia of Alabama. Retrieved 2012-05-08.
  5. "Martin Hydro Plant History". Lakes Online. Retrieved 2012-05-08.
This article is issued from Wikipedia - version of the 1/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.