Yardstick

This page is about the physical device. For metaphorical uses see standardization, benchmarking, canon (basic principle) and litmus test.

Folding carpenter's ruler

A yardstick is a straightedge used to physically measure lengths of up to a yard (0.9144 metres or three feet) high. Yardsticks are flat wooden boards with markings at regular intervals.

Construction

Yardsticks are often thin and rectangular, and made of wood or metal. Metal ones are often backed with a 'grippy' material, such as cork, to improve friction.

Measurements

In countries in which the metric system is used (such as Canada and France), yardsticks bearing imperial units markings on one side (three feet 3 ³⁄₈ in with inch and fractional inch) and metric units on the other (one metre with 100 centimetres and 1000 millimetres) are common, and are sometimes referred to as "metre-sticks" or "metre rulers". Sometimes the imperial units are not included. The folding carpenters' rulers used in Scandinavia are usually equipped with double measurements, metric and imperial on both sides, also functioning as a handy conversion table, accounting for its Scandinavian term: Tommestokk/tumstock (thumb (inch) stick),^[1] a term with the same meaning that is also used in Dutch: duimstok.

Application

The yardstick is usually employed for work on a medium scale; larger than desktop work on paper, yet smaller than large scale infrastructure work, where tape measures or longer measuring rods are used. Typical applications of yardsticks are for building furniture, vehicles and houses. Modern carpenters' yardsticks are usually made to be folded for ease of transport.

Yardsticks may be used as pointing devices for posters and projections. Yardsticks are also used as spars to make wings for Remote Controlled model aircraft that are made from corrugated plastic.

References

↑ NRK: Teknologi og design: Verktøyskapet (website in Norwegian)

Measuring and alignment tools

architect's scale beam compass calipers chalk box combination square compass coordinate-measuring machine Diagonal scale drafting machine engineer's scale flat spline French curve Gunter's chain jig laser level laser line level laser measuring tool lesbian rule measuring rod micrometer plumb-bob protractor Radius gauge ruler set square sliding T bevel spirit level steel square stencil straightedge T-square tape measure theodolite Thread pitch gauge try square Vernier scale vise weighing scale winding sticks yardstick

Types of tools Cleaning Cutting and abrasive Forestry Garden Hand Machine and metalworking Measuring and alignment Power

This article is issued from Wikipedia - version of the 12/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.