Modular Equipment Transporter

Alan Shepard stands next to the Modular Equipment Transporter.

The Modular Equipment Transporter (MET) was a two-wheeled, hand-pulled vehicle that was used as an equipment hauling device on traverses across the lunar surface. Designed after Apollo 12 astronauts Pete Conrad and Alan Bean had difficulties lugging their equipment significant distances to and from their Lunar Module, the MET primarily functioned as a portable workbench with a place for hand tools and their carrier, cameras, spare camera magazines, rock sample bags, environmental sample containers, and the portable magnetometer with its sensor and tripod.[1] It was carried on Apollo 14 and planned to be used on Apollo 15, but was used only on Apollo 14, since Apollo 15's mission was changed to be the first to employ the motorized Lunar Roving Vehicle, which transported both astronauts and equipment.

Astronauts nicknamed the MET "the rickshaw". It was pulled using a pulling bar in the front. The majority of the payload of the MET consisted of the Apollo Lunar Surface Experiments Package (ALSEP).[2] The performance of the MET was described as "adequate".[3] In fact, astronauts Alan Shepard and Edgar Mitchell were disappointed by the MET's performance. During one of the traverses they had to carry the MET together because it was too difficult to pull the MET through the rough lunar terrain.

Design criteria

Data from Operator's Manual By General Electric[4]

Dimensional limits

Operation specifications

Items stowed on MET

Data from Operator's Manual by General Electric[5]

Stowed Item # Items Stowed Quantity Lunar Module Stowage/Code
1 Camera/Power Pack (16 mm) 1 (on tool carrier) Ascent: A4
2 Magazine (16 mm) 3 (1 in camera) Ascent: A4
3 Camera (70 mm Hasselblad) 1 Ascent: F2B
4 Magazine (70 mm) 3 (1 in camera) Ascent: F2B
5 Handle (70 mm) 1 Ascent: F2B
6 Trigger (70 mm) 1 Ascent: F2B
7 RCU/70 mm Bracket 1 Ascent: F9A
8 Camera Assembly 1 Descent: M1R
9 Magazine Assembly 2 (1 in camera) Descent: M1F
10 Magazine Assembly Cover 1 Descent: M1F
11 RCU/LGEC Bracket 1 Descent
12 Camera (Close-up/stereo) 1 Descent:M1N
13 Weigh Bags 4 Descent: M1P
14 Trenching Tool 1 Descent: M1W
15 Special Environment Sample Container 2 Descent: M1P
16 Portable Magnetometer: *Tripod & Sensor*Cable Reel*Electronics Package 1 Descent: Adjacent Sequence Bay
17 ALHTC 1 Descent: ALSEP
18 Camera Staff 1 Descent: ALSEP
19 Hammer 1 Descent: M1K
20 Scoop 1 Descent: M1M
21 Lens/Brush 1 Descent: ALSEP
22 Tongs 1 Descent: M1H
23 Extension Handle 5 Descent: M1G
24 Core Tubes 2 Descent: 1 in SRC
25 35 Bag Dispenser 1 Descent: M1T
26 Penetrometer 1 Descent: ALSEP
27 Gnomon 1 Descent: M1A
27A Color Chart & Traverse Map 1 EA Descent: ALSEP
Line drawing of the Modular Equipment Transporter.

References

  1. MODULAR EQUIPMENT TRANSPORTER OPERATOR'S FAMILIARIZATION MANUAL (PDF). Houston, Texas: GENERAL ELECTRIC. April 27, 1970. p. 2. Retrieved 1 December 2014.
  2. Shepard, Alan; Armstrong, Deke Slayton with Jay Barbree ; introduction by Neil (2011). Moon shot : the inside story of America's Apollo moon landings (Revised edition. ed.). Open Road. ISBN 978-1-4532-5826-2.
  3. Lunar surface experiments, Houston, Texas: NASA Manned Spacecraft Center, April 1971
  4. MODULAR EQUIPMENT TRANSPORTER OPERATOR'S FAMILIARIZATION MANUAL (PDF). Houston, Texas: GENERAL ELECTRIC. April 27, 1970. p. 1. Retrieved 1 December 2014.
  5. MODULAR EQUIPMENT TRANSPORTER OPERATOR'S FAMILIARIZATION MANUAL (PDF). Houston, Texas: GENERAL ELECTRIC. April 27, 1970. p. 1. Retrieved 1 December 2014.
Wikimedia Commons has media related to Modular Equipment Transporter.
This article is issued from Wikipedia - version of the 6/11/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.