Modular building

Prefabricated house in Valencia, Spain.

Modular buildings and modular homes are sectional prefabricated buildings, or houses, that consist of multiple sections called modules. "Modular" is a method of construction differing from other methods of building. The module sections are constructed at an off site (sometimes, remote) facility, then delivered to the intended site of use. Complete construction of the prefabricated sections are completed on site. The prefabricated sections are sometimes lifted and placed on basement walls using a crane, the module prefabricated sections are set onto the building's foundation and joined together to make a single building. The modules can be placed side-by-side, end-to-end, or stacked, allowing a wide variety of configurations and styles in the building layout.

Modular buildings, also called prefabricated homes or precision built homes, are built to the same or higher building standards as complete on site stick built homes. Modular homes are built the same and considered the same as a stick built home. Material for stick built and modular homes are exactly the same. Modular homes are not doublewides or mobile homes, which are also called manufactured homes. First, modular homes do not have axles or a frame, meaning that they are typically transported to their site by means of flat-bed trucks. Secondly, modular buildings must conform to all local building codes for their proposed use, while doublewides and mobile homes have metal framing and are not built with same material as a prefabricated modular home. Doublewides and mobile homes made in the United States, are required to conform to federal codes governed by HUD (U.S. Department of Housing and Urban Development).[1]

Uses

Modular home in Sutton, Alaska

Modular buildings may be used for long-term, temporary or permanent facilities, such as construction camps, schools and classrooms, civilian and military housing, and industrial facilities.[2] Modular buildings are used in remote and rural areas where conventional construction may not be reasonable or possible, for example, the Halley VI accommodation pods used for a BAS Antarctic expedition.[3] Other uses have included churches, health care facilities, sales and retail offices, fast food restaurants and cruise ship construction. They can also be used in areas that have weather concerns, such as hurricanes.

Construction process

Modular components are typically constructed indoors on assembly lines. Modules' construction may take as little as ten days but more often one to three months. Completed modules are transported to the building site and assembled by a crane.[4] Placement of the modules may take from several hours to several days.

Manufacturing considerations

The entire process of modular construction places significance on the design stage. This is where practices such as Design for Manufacture and Assembly (DfMA) are used to ensure that assembly tolerances are controlled throughout manufacture and assembly on site. It is vital that there is enough allowance in the design to allow the assembly to take up any "slack" or misalignment of components. The use of advanced CAD systems, 3D printing and manufacturing control systems are important for modular construction to be successful.[5] This is quite unlike on-site construction where the tradesman can often make the part to suit any particular installation.

Advantages

Modular buildings are argued to have advantages over conventional buildings, for a variety of reasons.

Disadvantages

Market acceptance

Raines Court is a multi-story modular housing block in Stoke Newington, London, one of the first two residential buildings in Britain of this type. (December 2005)

Some home buyers and some lending institutions resist consideration of modular homes as equivalent in value to site-built homes. While the homes themselves may be of equivalent quality, entrenched zoning regulations and psychological marketplace factors may create hurdles for buyers or builders of modular homes and should be considered as part of the decision-making process when exploring this type of home as a living and/or investment option. In the UK and Australia, modular homes have become accepted in some regional areas; however, they are not commonly built in major cities. Modular homes are becoming increasingly common in Japanese urban areas, due to improvements in design and quality, speed and compactness of onsite assembly, as well as due to lowering costs and ease of repair after earthquakes. Recent innovations allow modular buildings to be indistinguishable from site-built structures. Surveys have shown that individuals can rarely tell the difference between a modular home and a site-built home.

Modular homes vs. mobile homes

Differences include the building codes that govern the construction, types of material used and how they are appraised by banks for lending purposes. The codes that govern the construction of modular homes are exactly the same codes that govern the construction of site-constructed homes. In the United States, all modular homes are constructed according to the International Building Code (IBC), IRC, BOCA or the code that has been adopted by the local jurisdiction.

Recognizing a mobile or manufactured home

A mobile home should have a small metal tag on the outside of each section. If you cannot locate a tag, you should be able to find details about the home in the electrical panel box. This tag should also reveal a manufacturing date.[10] Modular homes do not have metal tags on the outside but will have a dataplate installed inside the home, usually under the kitchen sink or in a closet. The dataplate will provide information such as the manufacturer, third party inspection agency, appliance information, and manufacture date.

Materials

The materials used in modular homes are typically the same as site constructed homes. Wood-frame floors, walls and roof are often utilized. Some modular homes include brick or stone exteriors, granite counters and steeply pitched roofs. Modulars can be designed to sit on a perimeter foundation or basement. In contrast, mobile homes are constructed with a steel chassis that is integral to the integrity of the floor system. Modular buildings can be custom built to a client's specifications. Current designs include multi-story units, multi-family units and entire apartment complexes. The negative stereotype commonly associated with mobile homes has prompted some manufacturers to start using the term "off-site construction."

Financing

Mobile homes often require special lenders.[11]

Modular homes on the other hand are financed as site built homes with a construction loan[12]

Standards and zoning considerations

Typically, modular dwellings are built to local, state or council code, resulting in dwellings from a given manufacturing facility having differing construction standards depending on the final destination of the modules.[13] For example, homes built for final assembly in a hurricane-prone, earthquake or flooding area may include additional bracing to meet local building codes. Steel and/or wood framing are common options for building a modular home.

Some US courts have ruled that zoning restrictions applicable to mobile homes do not apply to modular homes since modular homes are designed to have a permanent foundation. Additionally, in the US, valuation differences between modular homes and site-built homes are often negligible in real estate appraisal practice; modular homes can, in some market areas, (depending on local appraisal practices per Uniform Standards of Professional Appraisal Practice) be evaluated the same way as site-built dwellings of similar quality. In Australia, manufactured home parks are governed by additional legislation that does not apply to permanent modular homes. Possible developments in equivalence between modular and site-built housing types for the purposes of real estate appraisals, financing and zoning may increase the sales of modular homes over time.[14]

Building strength

Modular homes are designed to be stronger than traditional homes by, for example, replacing nails with screws, adding glue to joints, and using 10-20% more lumber than conventional housing. This is to help the modules maintain their structural integrity as they are transported on trucks to the construction site; however, it is difficult to predict the final building strength since the modules need to endure transportation stresses that traditional homes never experience.

The insulated concrete forms are modular units that are dry-stacked (without mortar) and filled with concrete. Insulating concrete forms has an acceptable ductility if used in high seismic risk zones. [15]

When FEMA studied the destruction wrought by Hurricane Andrew in Dade County Florida, they concluded that modular and masonry homes fared best compared to other construction.[16]

CE marking

The CE mark is a construction norm that guarantees the user of mechanical resistance and strength of the structure. It is a label given by European community empowered authorities for end-to-end process mastering and traceability.

All manufacturing operations are being monitored and recorded:

This ID and all the details are recorded in a database, At any time, the producer has to be able to answer and provide all the information from each step of the production of a single unit, The EC certification guaranties standards in terms of durability, resistance against wind and earthquakes.

Surfaces and finishes

Modular buildings can be assembled on top of multiple foundation surfaces, such as a crawl space, stilts (for areas that are prone to flooding), full basements or standard slab at grade. They can also be built to multi-story heights. Motels and other multi-family structures have been built using modular construction techniques. The height to which a modular structure can be built depends on jurisdiction, but a number of countries, especially in Asia, allow them to be built to 24 floors or more.

Exterior wall surfaces can be finalized in the plant production process or in the case of brick/stone veneers, field applications may be the builders' choice. Roof systems also can be applied in the field after the basic installation is completed.

U.S. regional differences with modular construction

Weather, population density, geographical distances, and local housing architecture play a role in the use of modular construction for home building. Because modular construction is so adaptable, it has begun to permeate every region of the U.S.

Northeast

The northeast is populated with factories that can combine modular housing design with other construction methods such as panelization and SIPs. Modules are typically limited to 16' width and up to 70' lengths because of the narrow road structure and densely populated areas of the region. Other limitations are placed on transportation to locations such as Connecticut, Cape Cod, and Long Island.

Mid-Atlantic

The Mid-Atlantic region is similar to the northeast, in terms of building design and transport restriction to modules to a width of not more than 16'.

Southeast

Manufacturers in the Southeast often limit their ability to customize homes and focus on very traditional single story floor plans. Much of the south is in coastal and high wind areas; modular construction may prove appealing in this area as it is already inherently stronger as it must be built for transport and craned installation, therefore offering wind resistance as good or higher than site-built construction.

Central Plains

The central plains states typically are made up of farming and rural communities. Ranch homes are the mainstay of the region. Prone to strong storms and tornado conditions, modular construction offers the ability to better withstand these storm patterns than its site built counterpart. The inter-module attachments that must be made when assembling a modular home on a foundation offer an inherently stronger home than site built construction can offer. Interior finishes on both the walls and ceilings are typically textured. Corners on interior walls are typically rounded and finish trim around windows is optional. Because of the wider road and lower population density, modules can be as wide as 20' and as long as 90'. The ability to provide larger modules reduces the amount of modules needed to complete a home.

Rockies

Home design in this area ranges from Chalet style homes to log cabin style homes. Manufacturers in the region therefore provide a number of styles of homes. Capability varies from factory to factory as well as the ability to do complete customization of floor plans. Transportation is limited mostly to 16' wide modules to travel the roads of the area.

West Coast

The high cost of living in coastal areas, and especially California, may provide modular construction an edge due to its lower cost. Extreme building regulation and environmental requirements can delay the start of residential construction. Several factories specialize in environmentally responsible construction by following green construction standards and offering zero energy homes.

Living in coastal areas also mean that the modular home structure should be strong enough to withstand winds with high velocity. Modular homes, built correctly, have such kind of resistance to stand high wind velocity without any damage issues.

Research and development

Modular construction is the subject of continued research and development worldwide as the technology is applied to taller and taller buildings. Research and development is carried out by modular building companies and also research institutes such as the Modular Building Institute [17] and the Steel Construction Institute,.[18]

Open modular building

See also: Green building

Modular building can also be open source and green.

3D printing can be used to build the house.

The main standard is OpenStructures and its derivative Autarkytecture.[19]

See also

References

  1. ↑ "HUD- Manufactured Housing and Standards". portal.hud.gov. Retrieved 2016-05-03.
  2. ↑ "Modular Buildings | Commercial Structures". www.comstruc.com. Retrieved 2016-05-03.
  3. ↑ "Halley VI Research Station - British Antarctic Survey". www.bas.ac.uk. Retrieved 2016-05-03.
  4. ↑ "Why Build Modular?". www.modular.org. Retrieved 2016-05-03.
  5. ↑ "Portable Building Manufacturing | Speed Space". www.speedspace.org. Retrieved 2016-05-03.
  6. ↑ "High-rise housing going modular". Retrieved 2015-10-15.
  7. ↑ "Pros and Cons of a Commercial Modular Building". www.modulartoday.com. Retrieved 2015-10-15.
  8. ↑ "Prefab Housing Disadvantages". Budgeting Money - The Nest. Retrieved 2015-10-15.
  9. ↑ "Buying a Manufactured Home". State Farm.
  10. ↑ http://freshome.com/2013/03/27/10-basic-facts-about-modular-homes/
  11. ↑ "HUD Financing Manufactured (Mobile) Homes". portal.hud.gov. Retrieved 2016-05-03.
  12. ↑ http://freshome.com/2013/03/27/10-basic-facts-about-modular-homes/
  13. ↑ "Australian Government modular home regulations". Retrieved 2007-10-21.
  14. ↑ "Building Codes for Modular Homes". Retrieved 2010-08-06.
  15. ↑ Asadi, Pouria (March 2016). "Response modification factor due to ductility of screen-grid ICF wall system in high seismic risk zones". KSCE Journal of Civil Engineering. doi:10.1007/s12205-016-0083-7. ISSN 1226-7988.
  16. ↑ http://www.fema.gov/library/viewRecord.do?id=2765
  17. ↑ Modular Building Institute
  18. ↑ SCI - Steel Construction Institute
  19. ↑ http://m.z33.be/en/artworks/thomas-lommee-christiane-hoegner-autarkytecture

External links

This article is issued from Wikipedia - version of the 11/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.