Morrison Bridge
Morrison Bridge | |
---|---|
Carries | motor vehicles, pedestrians, cyclists |
Crosses | Willamette River |
Locale | Portland, Oregon, U.S. |
Maintained by | Multnomah County |
ID number | 02758 |
Characteristics | |
Design | double-leaf "Chicago style" bascule |
Total length | 760 feet (236.1 m) |
Width | 90 feet (27.4 m) |
Longest span | 284 feet |
Clearance below | 69 feet closed |
History | |
Opened |
May 24, 1958 (replaced |
Morrison Bridge | |
Location | Portland, Oregon; Willamette River at river mile 12.8 |
Coordinates | 45°31′04″N 122°40′11″W / 45.517895°N 122.669692°WCoordinates: 45°31′04″N 122°40′11″W / 45.517895°N 122.669692°W |
MPS | Willamette River Highway Bridges of Portland, Oregon |
NRHP Reference # | 12000933[1] |
Added to NRHP | November 14, 2012[1] |
The Morrison Bridge is a bascule bridge that spans the Willamette River in Portland, Oregon. Completed in 1958, it is the third bridge at approximately the same site to carry that name.[2] It is one of the most heavily used bridges in Portland.[3] It was added to the National Register of Historic Places in November 2012.[1][4]
Predecessors
The original Morrison Bridge (or Morrison Street Bridge) was a wooden truss swing-span bridge completed on April 12, 1887, as the first Willamette River bridge in Portland and the longest bridge west of the Mississippi River. It was named for the street it carried, which had been named for John L. Morrison, a Scottish immigrant who built the first home on Morrison Street.[2] It was first a toll bridge (rates: horse-drawn rig - US$0.15, team of horses - $0.20, pedestrian - $0.05) but went toll-free in 1895.[2] The second Morrison was another swing bridge that was built in 1905. It was not designed for automobiles and the 1958 replacement was long overdue.
The first Morrison Bridge carried horsecars starting in March 1888, about a year after the bridge opened. Electric streetcars, introduced in Portland in November 1889, replaced horsecar service on the bridge in stages starting in 1890.[5] Streetcars also crossed the second (1905) Morrison bridge, but not the third (1958), as the last lines of Portland's past streetcar system had been abandoned by the time it opened.[2][6]
History of present bridge
The present bridge was built by Multnomah County. It was completed on May 24, 1958 at a cost of $12.9 million.[2] In 1961, Interstate 5 and Interstate 84 ramps were added.
In 1987, the Morrison Bridge became the first bridge illuminated by the Willamette Light Brigade.[2] In 2007, the original 16 colored floodlamps illuminating the concrete piers were replaced by energy-efficient and computer-controlled LEDs.[7] Different colors may be selected for each of eight zones of the piers.[8] Static and animated patterns may be requested for a fee which ranges from $100 per night to $1200 per month.[9]
Access for bicycles and pedestrians was improved in a $1.9 million project which began construction in March 2009 and added a barrier-separated path on the south side.[10] Previously, there were only narrow sidewalks. In 2011–12, the steel grating on the bascule deck was replaced with fiber-reinforced polymer panels to provide better traction for vehicles. The work was completed in March 2012,[3] but problems with the new deck panels began to be reported in fall 2013.[11] Multnomah County anticipates a major seismic upgrade around 2020. The bridge was added to the National Register of Historic Places in November 2012.[4]
Description and statistics
The bridge is the largest mechanical device in Oregon.[12] 36 ft. tall gears drive 940-ton counterweights located inside each of the piers. The 69 ft. clearance is sufficient for most river traffic, requiring bridge openings only about 30 times a month. It currently carries 50,000 vehicles daily in six lanes. The canted windows of the control tower give the distinctive look of air traffic control towers. The current bridge does not connect to Morrison Street at its west end because the second bridge was left in operation while the latest version was built, necessitating that the replacement bridge be on a different alignment.[2]
See also
- List of bridges on the National Register of Historic Places in Oregon
- List of crossings of the Willamette River
References
- 1 2 3 "Weekly list of actions taken on properties: 11/13/12 through 11/16/12". National Park Service. November 23, 2012. Retrieved September 30, 2013.
- 1 2 3 4 5 6 7 Wood Wortman, Sharon; Wortman, Ed (2006). The Portland Bridge Book (3rd ed.). Urban Adventure Press. pp. 53–60. ISBN 0-9787365-1-6.
- 1 2 "Portland's Morrison Bridge reopens to traffic after 10-month closure". The Oregonian. March 26, 2012. Retrieved August 6, 2012.
- 1 2 Tims, Dana (November 21, 2012). "Four Multnomah County bridges listed on National Register of Historic Places". The Oregonian. p. B1. Retrieved October 11, 2013.
- ↑ Labbe, John T. (1980). Fares, Please! Those Portland Trolley Years, pp. 34–36, 67–68, 70–71. Caldwell, Idaho (US): The Caxton Printers. ISBN 0-87004-287-4.
- ↑ Thompson, Richard H. (2010). Portland's Streetcar Lines. Arcadia Publishing. pp. 99, 105. ISBN 978-0-7385-8126-2.
- ↑ Green, Susan (February 14, 2007). "Morrison Bridge will get its lights back". The Oregonian. p. B2.
- ↑ "Morrison Bridge Pier Light Application" (PDF). Willamette Light Brigade. Retrieved August 6, 2012.
- ↑ Haberman, Margaret (July 17, 2009). "Got a favorite color? You can shine it on the Morrison Bridge—for a fee". The Oregonian. Retrieved August 6, 2012.
- ↑ Hannah-Jones, Nikole (March 26, 2009). "Morrison Bridge path construction starts today". The Oregonian. Retrieved August 6, 2012.
- ↑ Rose, Joseph (October 8, 2013). "Morrison Bridge deck crumbling". The Oregonian. p. A6. Retrieved October 11, 2013.
- ↑ Hamilton, Don (May 25, 2001). "Bright lights, bridge city". Portland Tribune.
External links
Wikimedia Commons has media related to Morrison Bridge. |
- Morrison Bridge page on Multnomah County website
- Willamette Light Brigade
- Panoramic image