Nagler NH-160

Nagler NH-160
Role Helicopter
Manufacturer Nagler Helicopter Company
Designer Bruno Nagler
First flight December 1955
Number built 1


The Nagler NH-160 was an experimental single seat helicopter with counter-rotating blades.[1]

Design and development

Bruno Nagler began wind tunnel experiments into helicopter design in 1926 and developed the first practical swash plate. The Nagler NH-120 was developed to test the idea of counteracting rotor torque with a small separate rotor. The engine was mounted above the main rotor on a shaft, and the anti-torque rotor was mounted above both. The NH-160 had a conventional helicopter engine and rotor layout, with the exception of the smaller anti-torque rotor mounted under the fuselage between the landing skids.[2] Yaw control on both was effected through changing the difference in rotational speed between the two rotors, using a series of disc brakes. A small tail surface provided directional stability in forward flight. The smaller rotor would spin at a higher rpm, with about 60 percent of the load,. the main rotor being adjustable for lift control.

The NH-160 proved to be much more stable in tests than the NH-120 which had a higher center of gravity.

Variants

NH-120
Helicopter with engine mounted above rotor with a counter-torque rotor mounted above the engine.[3]
NH-170
An enclosed two-seat side-by-side design with a shrouded lower counter-torque rotor.

Specifications (Nagler NH-160)

Data from Sport Aviation

General characteristics

Performance

See also

Related development


References

  1. ↑ The Aeroplane, Volume 90. 1956.
  2. ↑ Sport Aviation. January 1959. Missing or empty |title= (help)
  3. ↑ Paul Marcel Lambermont, Anthony Pirie. Helicopters and autogyros of the world.
This article is issued from Wikipedia - version of the 6/23/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.