Oldenburg S 3

Oldenburg S 3
DRG Class 13.18
Number(s) 151–154, 160, 161
DRG 13 1801–1806
Quantity 6
Manufacturer Hanomag
Year(s) of manufacture 1903–1904
Retired 1927
Wheel arrangement 4-4-0
Axle arrangement 2’B n2v
Type Express train locomotive
Length over buffers 17,461 mm (57 ft 3 in)
Service weight 52.2 t
Adhesive weight 30.2 t
Axle load 15.0 t
Top speed 95 km/h (59 mph)
Driving wheel diameter 1,980 mm (78 in)
Leading wheel diameter 1,000 mm (39 in)
Cylinder bore 460/680 mm
Piston stroke 630 mm (25 in)
Boiler Overpressure 11.8 bar
Grate area 2.27 m²
Evaporative heating area 119.4 m²

The Oldenburg Class S 3 steam locomotive was a German engine built for the Grand Duchy of Oldenburg State Railways (Großherzoglich Oldenburgische Staatseisenbahnen) in 1903 and 1904. It was based on a Prussian prototype, the Prussian S 3 (see photo), and procured for the route between Wilhelmshaven, Oldenburg and Bremen. It was the first express train engine built for the Oldenburg state railways and also the first one fitted with a steam dome. It replaced the old P 4 passenger train locomotives.

Six engines were built by Hanomag in 1903 and 1904 with numbers 151–154, 160 and 161. They differed in several technical details from their Prussian counterparts, but did not have Lentz valve gear which, later, became common throughout Oldenburg.

The Deutsche Reichsbahn took over all six locomotives and grouped them into DRG Class 13.18, allocating them the numbers 13 1801 to 13 1806. They were retired by 1927.

See also

Sources

This article is issued from Wikipedia - version of the 8/8/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.