OrthoCAD Network Research Cell

OrthoCAD Network Research Cell
Established 2007
Location Mumbai, Maharashtra
Operating agency
 Indian Institute of Technology Bombay
Website http://orthocad.iitb.ac.in/ [1][2]

OrthoCAD Network Research Cell is a federally funded research and development facility in the Indian Institute of Technology Bombay (IIT Bombay), Mumbai, India.[3] The Laboratory's primary function is the design and development of reconstruction systems for orthopaedic and other applications, the current focus is on mega-implants for limb-saving surgery, mainly for children affected by bone cancer.

Mission

The mission of the OrthoCAD group is to develop indigenous research and development capabilities on medical implants, surgical instruments (Armamentarium), testing protocol, and surgery planning and navigation system. This is expected to respond to the growing medical needs of Indian patients, to provide affordable and available devices, and to train graduates[4] as well as research scientists in the area of Biomedical engineering and manufacturing.

Research partners

The OrthoCAD Network Research Cell was established in January 2007 in the Department of Mechanical Engineering at IIT Bombay.[3] It is supported by the Office of the Principal Scientific Advisor to the Government of India, New Delhi.

The R&D team comprises mechanical engineers, orthopaedic surgeons and materials scientists from

The cell provides the intellectual foundation for surgeons to collaborate with engineering faculty and students to resolve generic, long-range challenges, thereby producing the knowledge base for steady advances in technology and their speedy transition to the people who desperately need affordable solutions.

Facilities

The Center is equipped with appropriate equipments and instrumentation, including high-end computing facilities.

Collaboration

The OrthoCAD group is collaborating with other similar groups in India and abroad [10] in specific area of mutual interest.[9]

References

  1. ↑ OrthoCAD Network Research Cell, IIT Bombay, http://orthocad.iitb.ac.in
  2. ↑ http://www.me.iitb.ac.in/~bravi/lab
  3. 1 2 Development of Biomaterials, Devices and Implants for Orthopaedic applications in India, http://psa.gov.in/writereaddata/12420536351_progress_report.pdf, pp.56-59 (accessed on 10 Nov.'09)
  4. ↑ http://people.sutd.edu.sg/~subburaj/
  5. ↑ Subburaj, K.; Ravi, B.; Agarwal, M.G. (2009). "Automated identification of anatomical landmarks on 3D bone models reconstructed from CT scan images". Computerized Medical Imaging & Graphics. 33 (5): 359–368. doi:10.1016/j.compmedimag.2009.03.001.
  6. ↑ K. Subburaj, B. Ravi, and M.G. Agarwal, "Automated 3D geometric reasoning in computer assisted joint reconstructive surgery," IEEE Conference on Automation Science and Engineering, Bangalore, India, 22-25 Aug, (2009), 367-372, PDF
  7. ↑ Subburaj, K; Ravi, B; Agarwal, Manish (2010). "Computer-aided methods for assessing lower limb deformities in orthopaedic surgery planning". Computerized Medical Imaging and Graphics. 34 (4): 277–288. doi:10.1016/j.compmedimag.2009.11.003.
  8. ↑ B. Ravi, Anip Sharma and Manish Agarwal, "Haptic Solid Modeling for Pelvic Bone Tumor Resection Planning and Prosthesis Development," International CAD Conference (CAD'05), Bangkok, 20–24 June 2005.
  9. 1 2 B. Ravi and Manish Agarwal, "Computer-aided Development of Mega Endo-Prostheses," chapter in the book, Bio-Materials and Prototyping Applications in Medicine, (Eds.) Bopaya Bidanda and Paolo Bartolo, Springer, USA, ISBN 978-0-387-47682-7 (2007). doi:10.1007/978-0-387-47683-4_10
  10. ↑ Medical Engineering and Design Laboratory at SUTD http://people.sutd.edu.sg/~subburaj/

This article is issued from Wikipedia - version of the 11/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.