Peroxide fusion

Example of automated system: “Peroxide Fluxer” from CLAISSE

Peroxide fusion is used to prepare samples for inductively coupled plasma (ICP), atomic absorption (AA) analysis and wet chemistry. Sodium peroxide (Na2O2) is used to oxidize the sample that becomes soluble in a diluted acid solution. This method allows complete dissolution of numerous refractory compounds like chromite, magnetite, ilmenite, rutile, and even silicon, carbides, alloys, noble metals and materials with high sulfide contents.

Peroxide fusion can be performed either manually or with automated systems. The latter have the advantage of increasing productivity, improving safety, maintaining repeatable preparation conditions, and avoiding spattering as well as cross-contamination.

Peroxide fusion vs. other dissolution methods

Acid digestion is the most common dissolution method used for many types of samples. Unfortunately, acid digestion involves numerous manipulations of concentrated acids. Some types of samples even require the use of perchloric acid (HClO4) that is explosive when it comes into contact with any organic materials and hydrofluoric acid (HF) that is extremely dangerous for human health, not to mention it will dissolve the walls of any glass container it is being processed within. Moreover, it is often difficult to get full dissolution of the sample, even when using these hazardous chemicals.

References

    This article is issued from Wikipedia - version of the 4/1/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.