PieP

Process Image Exchange Protocol (PieP) is a very simple Fieldbus protocol used for process automation. It is an application layer protocol developed over TCP/IP. PieP uses method of transferring process images between I/O Devices and the PLC which makes the protocol simple to use. This protocol works just ensuring that the mirror of the input image in the PLC gets updated from the generated input image from I/O Device and the output image in the I/O device is always maintained as same as the mirror image in the PLC.

External links

Automation protocols

Process automation	AS-i BSAP CC-Link Industrial Networks CIP CAN bus CANopen DeviceNet ControlNet DF-1 DirectNET EtherCAT Ethernet Global Data (EGD) Ethernet Powerlink EtherNet/IP Factory Instrumentation Protocol FINS FOUNDATION fieldbus H1 HSE GE SRTP HART Protocol Honeywell SDS HostLink INTERBUS MECHATROLINK MelsecNet Modbus Optomux PieP Profibus PROFINET IO RAPIEnet SERCOS interface SERCOS III Sinec H1 SynqNet TTEthernet

Industrial control system	MTConnect OPC DA OPC HDA OPC UA

Building automation	1-Wire BACnet C-Bus DALI DSI Factory Instrumentation Protocol KNX LonTalk Modbus oBIX VSCP X10 xAP xPL ZigBee

Power-system automation	IEC 60870 IEC 60870-5 IEC 60870-6 DNP3 Factory Instrumentation Protocol IEC 61850 IEC 62351 Modbus Profibus

Automatic meter reading	ANSI C12.18 IEC 61107 DLMS/IEC 62056 M-Bus Modbus ZigBee

Automobile / Vehicle	AFDX ARINC 429 CAN bus ARINC 825 SAE J1939 NMEA 2000 FMS Factory Instrumentation Protocol FlexRay IEBus J1587 J1708 Keyword Protocol 2000 Unified Diagnostic Services LIN MOST VAN

This article is issued from Wikipedia - version of the 3/12/2012. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.

PieP

See also

External links