Poligeenan

Poligeenan (CAS No. 53973-98-1) is a low viscosity, low molecular weight, sulfated polygalactan polymer used exclusively in clinical diagnostic applications. The polymer is derived from the molecular backbone of carrageenan.

The name "poligeenan" was confirmed in 1988 by the United States Adopted Names (USAN) Council.[1] The Council is sponsored by the American Medical Association, the American Pharmaceutical Association, and the US Pharmacopeial Convention Inc.

Prior to 1988, "poligeenan" was referred to as "degraded carrageenan" in the scientific literature. The terms "poligeenan" and "degraded carrageenan" were often used interchangeably in research articles[2] and reports.[3] The use of the term "degraded carageenan" caused confusion which resulted in the attribution the negative observations associated with “poligeenan/degraded carrageenan” being attributed to “carrageenan”.[4][5] Carrageenan is an approved food additive[6] with an extensive toxicology data base that has been reviewed by regulatory bodies and provides scientific evidence for safe inclusion in foods. Poligeenan is not an approved food additive in the United States. Poligeenan’s low molecular weight precludes it from exhibiting functionality in food. The International Agency for Research on Cancer assigned Poligeenan to carcinogenic risk category 2B (possibly carcinogenic to humans).[7] "Poligeenan" and "carrageenan" are completely different products.

Poligeenan is produced by the harsh acid degradation of carrageenan. Carrageenan in solution is processed at low pH (~pH1.0) and high temperature (~90 °C / 194 °F) for up to 6h until the weight-average molecular weight (Mw) has been reduced to the range 10,000 – 20,000 Daltons (10-20 kDa). The resulting poligeenan solution is neutralized and spray dried to a fine powder.

The primary use for poligeenan is for clinical diagnostic applications, and specifically the suspension of barium sulfate slurries used in X-ray studies of the mouth, throat, and esophagus during swallowing. For this application, poligeenan delivers three essential properties: First, its viscosity imparts lubricity to make the slurry easier to swallow. Second, this same viscosity is high enough to maintain full suspension of all barium sulfate particles during the complete X-ray procedure. Third, the high charge density of the poligeenan solution (ester sulfate units) prevents caking or aggregation of the barium sulfate particles during long-term storage of ready-to-use slurry products, these being easily reconstituted by shaking. The combination of these three application properties necessitates poligeenan to have Mw between 10-20 kDa.

References

  1. ↑ List No. 297, New Names, 1988, USAN Council, Clinical Pharmacology and Therapeutics, 44, 246-248).
  2. ↑ Beattie, et al. 1970. "A Study of Orally-Administered Degraded Carrageenan in the Baboon". Food. Cosmet. Toxicol. 8:257-266.
  3. ↑ Beattie, et al. 2014. Corrigendum to "A Study of Orally-Administered Degraded Carrageenan in the Baboon", Food and Chemical Toxicology , doi: 10.1016/j.fct2014.10.012.
  4. ↑ McKim JM. 2014. “Food additive carrageenan: Part I: A critical review of carrageenan in vitro studies, potential pitfalls, and implications for human health and safety
  5. ↑ Weiner ML. 2014. “Food additive carrageenan: Part II: A critical review of carrageenan in vivo safety studies.
  6. ↑ 21 C.F.R. §172.620
  7. ↑ IARC Monographs on the Evaluation of Carcinogenic Risks to Human. Agents Classified by the IARC Monographs Volumes 1-110. Updated List 23 October, 2014
This article is issued from Wikipedia - version of the 6/20/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.