Polychlorotrifluoroethylene

Polychlorotrifluoroethylene
Names
Other names
Poly(1-chloro-1,2,2-trifluoroethylene)
Poly(ethylene trifluoride chloride)
Polymonochlorotrifluoroethylene
Poly(trifluoroethylene chloride)
Poly(chlorotrifluoroethylene)
Poly(trifluorochloroethene)
Poly(chlorotrifluoroethene)
Poly(trifluorovinyl chloride)
Poly(vinyl trifluorochloride)
Kel-F 300; Kel-F 81
Identifiers
9002-83-9 YesY
Abbreviations PCTFE, PTFCE[1]
ECHA InfoCard 100.120.473
MeSH Polychlorotrifluoroethene
Properties
(C2ClF3)n°°
Molar mass Variable
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Polychlorotrifluoroethene (PCTFE or PTFCE) is a thermoplastic chlorofluoropolymer with the molecular formula (CF2CClF)n, where n is the number of monomer units in the polymer molecule. It is similar to polytetrafluoroethene (PTFE), except that it is a homopolymer of the monomer chlorotrifluoroethylene (CTFE) instead of tetrafluoroethene. It has the lowest water vapor transmission rate of any plastic.[2]

History

It was discovered in 1934[3][4] by Fritz Schloffer and Otto Scherer who worked at IG Farben Company, Germany.[5]

Trade names

After World War II, PCTFE was commercialized under the trade name of Kel-F 81® by M W Kellogg company in early 1950s.[6] The name Kel-F were derived from Kellogg and Fluoropolymer, which also represents other fluoropolymers like the copolymer poly(chlorotrifluoroethylene-co-vinylidene fluoride) (Kel-F 800).[7] These were acquired by 3M Company in 1957.[6] But 3M discontinued manufacturing of Kel-F® by 1996.

PCTFE resin is now manufactured in different trade names like Neoflon® PCTFE from Daikin or Aclon® from Allied Signal. However, Kel-F® remains the most commonly used trade name still today.[8] PCTFE films are sold under the tradename Aclar® by Allied Signal.[9] Tradenames of PCTFE in other manufacturing companies include Hostaflon C2 from Hoechst, Fluon from ICI, Voltalef from Arkema, Aclar from Honeywell, Plaskon from Allied Chemical Corporation and Halon from Ausimont USA.[10][11]

Synthesis

PCTFE is an addition homopolymer. It is prepared by the free radical polymerization of chlorotrifluoroethylene (CTFE)[12] and can be carried out by solution, bulk, suspension and emulsion polymerization.[13]

Properties

PCTFE has high tensile strength and good thermal characteristics. It is nonflammable[14] and the heat resistance is up to 175 °C.[15] It has a low coefficient of thermal expansion. The glass transition temperature (Tg) is around 45 °C.[1]

PCTFE has one of the highest limiting oxygen index (LOI).[16] It has good chemical resistance. It also exhibits properties like zero-moisture absorption and non wetting.[15][17]

It does not absorb visible light. When subjected to high energy radiation it undergoes, like PTFE, degradation.[18] It can be used as a transparent film.[14]

The presence of a chlorine atom, having greater atomic radius than that of fluorine, hinders the close packing possible in PCTFE. This results in having a relatively lower melting point among fluoropolymers[19] and it is around 210 - 215 °C.[2]

PCTFE is resistant to the attack by most chemicals and oxidizing agents; a property which is exhibited due to the presence of high fluorine content. However, it swells slightly in halocarbon compounds, ethers, esters and aromatic solvents.[2] PCTFE is resistant to oxidation because it does not have any hydrogen atoms.[20]

PCTFE exhibits a permanent dipole moment due to the molecular asymmetry of its repeating unit. This dipole moment is perpendicular to the carbon chain axis.[21]

Differences from PTFE

See also: PTFE

PCTFE is a homopolymer of chlorotrifluoroethylene (CTFE), whereas PTFE is a homopolymer of tetrafluoroethylene. The monomers of the former differs from that of latter structurally by having a chlorine atom replacing one of the fluorine atoms. Hence each repeating unit of PCTFE have a chlorine atom in place of a fluorine atom. This accounts for PCTFE to have less flexibility of chain and hence higher glass transition temperature. PTFE has a higher melting point and is more crystalline than PCTFE, but the latter is stronger and stiffer. Though PCTFE has excellent chemical resistance, it is still less than that of PTFE.[22] PCTFE has lower viscosity, higher tensile strength and creep resistance than PTFE.[1]

PCTFE is injection moldable and extrudable whereas PTFE [23] is not.[1]

Applications

PCTFE finds majority of its application due to two main properties; water repulsion and chemical stability. PCTFE films are used as a protective layer against moisture. These include,

Due to its chemical stability, it acts as a protective barrier against chemicals. It is used as a coating and prefabricated liner for chemical applications. PCTFE is also used for laminating other polymers like PVC, polypropylene, PETG, APET etc. It is also used in transparent eyeglasses, tubes, valves, chemical tank liners, O-rings, seals and gaskets.[15]

PCTFE is used to protect sensitive electronic components because of its excellent electrical resistance and water repulsion. Other uses include flexible printed circuits and insulation of wires and cables.[24][22]

Low molecular weight PCTFE waxes, oils and greases find their application as inert sealants and lubricants. They are also used as gyroscope flotation fluids and plasticizers for thermoplastics.[2]

References

  1. 1 2 3 4 Christopher C. Ibeh (2011). THERMOPLASTIC MATERIALS Properties, Manufacturing Methods, and Applications. CRC Press. p. 491. ISBN 978-1-4200-9383-4.
  2. 1 2 3 4 C.H. Kurita (20 Jan 1988). "D-ZERO COLD VALUE" (pdf). pp. 58–61. Retrieved June 14, 2012. |chapter= ignored (help)
  3. ↑ Tsuyoshi Nakajima; Henri Groult (4 August 2005). Fluorinated Materials For Energy Conversion. Elsevier. p. 472. ISBN 978-0-08-044472-7. Retrieved 14 July 2012.
  4. ↑ B. Améduri; Bernard Boutevin (7 July 2004). Well-architectured Fluoropolymers: Synthesis, Properties And Applications. Elsevier. p. 5. ISBN 978-0-08-044388-1. Retrieved 14 July 2012.
  5. ↑ Koch 2012, p. 11.
  6. 1 2 Takashi Okazoe. "Synthetic Studies on Perfluorinated Compounds by Direct Fluorination" (PDF). p. 17. Retrieved July 14, 2012.
  7. ↑ Suhithi M. Peiris; Gasper J. Piermarini (10 December 2008). Static Compression of Energetic Materials. Springer. pp. 158–. ISBN 978-3-540-68146-5. Retrieved 14 July 2012.
  8. ↑ "Kel-F® - PCTFE". Retrieved June 5, 2012.
  9. ↑ Sina Ebnesajjad (31 December 2000). Fluoroplastics, Volume 1: Non-Melt Processible Fluoroplastics. William Andrew. p. 74. ISBN 978-0-8155-1727-6. Retrieved 8 July 2012.
  10. ↑ DIANE Publishing Company (1 July 1993). New Materials Society, Challenges and Opportunities: New Materials Science and Technology. DIANE Publishing. p. 8.42. ISBN 978-0-7881-0147-2. Retrieved 8 July 2012.
  11. ↑ Ernst-Christian Koch (17 April 2012). Metal-Fluorocarbon Based Energetic Materials. John Wiley & Sons. p. 23. ISBN 978-3-527-32920-5. Retrieved 8 July 2012.
  12. ↑ Sina Ebnesajjad (31 December 2002). Melt Processible Fluoropolymers: The Definitive User's Guide and Databook. William Andrew. p. 636. ISBN 978-1-884207-96-9. Retrieved 8 July 2012.
  13. ↑ Ebnesajjad 2000, p. 61.
  14. 1 2 Ruth Winter (2 August 2007). A Consumer's Dictionary of Household, Yard and Office Chemicals: Complete Information About Harmful and Desirable Chemicals Found in Everyday Home Products, Yard Poisons, and Office Polluters. iUniverse. p. 255. ISBN 978-0-595-44948-4. Retrieved 14 July 2012.
  15. 1 2 3 François Cardarelli (2008). Materials Handbook: A Concise Desktop Reference. Springer. pp. 708–709. ISBN 9781846286681. ISBN 1846286689.
  16. ↑ Ebnesajjad, Sina. Fluoroplastics, Volume 2: Melt Processible Fluoropolymers - The Definitive User Guide and Data Book. p. 560.
  17. ↑ "RIDOUT PLASTICS". Retrieved June 5, 2012.
  18. ↑ J. A. Brydson (8 November 1999). Plastics Materials. Butterworth-Heinemann. pp. 423–. ISBN 978-0-7506-4132-6. Retrieved 30 June 2012.
  19. ↑ Drobny 2006, p. 8, 22.
  20. ↑ http://web.mst.edu/~wlf/chem381/chap26.html
  21. ↑ "Dielectric Properties of Semicrystalline Polychlorotrifluoroethylene" (PDF). JOURNAL OF RESEARCH of the National Bureau of Standards—A. Physics and Chemistry. 66A (4): 1. 1962. Retrieved June 26, 2012.
  22. 1 2 Dominick V. Rosato; Donald V. Rosato; Matthew V. Rosato (2004). Plastic Product Material and Process Selection Handbook. Elsevier. p. 75. ISBN 185617431X. ISBN 9781856174312.
  23. ↑ http://www.ptfepacking.net/
  24. ↑ Drobny 2006, p. 37-39.

Resources

This article is issued from Wikipedia - version of the 10/4/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.