Remington Model 597

Remington Model 597

Type	Rifle
Place of origin	United States
Production history
Designed	1997
Manufacturer	Remington Arms
Produced	1997–present
Specifications (Standard model^[1])
Weight	5.5 lb (2.5 kg)
Length	40 in (100 cm)
Barrel length	20 in (51 cm)

Cartridge	.22 LR, .22 WMR, .17 HMR(Obsolete)
Action	semi-automatic
Muzzle velocity	350 to 1750 ft/s (110 to 530 m/s)
Maximum firing range	2.0 miles or 3.2 km
Feed system	10-round detachable magazine (factory standard) or 30-round magazine (aftermarket)

The Remington Model 597 is an American semi-automatic rifle manufactured by Remington Arms. The .22 Long Rifle version has a removable 10-round magazine, while the magazines for the larger .22 WMR and .17 HMR cartridges hold 8 rounds. The standard and WMR versions have been in production since 1997, and the .17 HMR version since 2002. The unique bolt-guidance system uses two steel guide rails. The 597 is built in Remington's Mayfield, Kentucky plant.

The Remington 597 is a competitor to the Marlin Model 795 and Ruger 10/22.

Overview and variants

The Model 597 is available in a number of configurations. Both synthetic and laminated wood stocks are available. The standard barrel length is 20 inches. The bolt system rides on twin rails, and locks in the open position when the last round is fired.

The receiver has integral 11 mm dovetail mounts (sometimes called "tip-off" mounts), as well as pre-drilled and tapped mount points that will accommodate an optional Weaver-style scope base. The "tip-off" mounts are suitable only for small, light scopes for air rifle or rimfire use. For heavier scopes, the Weaver base is recommended rather than the tip-off mounts, since the greater mass may cause the scope to shift and "lose zero."

A target model is available with a 16.5-inch bull barrel with no sights, as well as a "tactical" variant that is all black with a threaded barrel tip to accommodate a flash hider, muzzle brake or suppressor. Two exclusive models sold by Dick's Sporting Goods come with a 3–9× scope, with one having a 20-inch bull barrel.

Magazines

The 597 has had at least three generations of magazines. Early magazines were made of plastic and caused a number of feeding problems when loaded with more than three to four rounds. This early magazine was seen as a major detractor to what was otherwise a good rifle. As the magazine aged and dirt, oil and unburned powder got ground into the magazine and the follower the feeding problems could increase.

The second generation of magazines were made from investment-cast aluminum alloy. These were available for purchase in the year 2000. The base cap and follower were still made of plastic. This new magazine was a great improvement over the first generation. The new-style magazine was shipped with the later rifles. These magazines were also available separately for purchase.

The third generation of magazines were very similar to the second generation with only small differences, but a noticeable improvement in reliability. Third-generation magazines can be identified by the number "10" stamped on the side; the second generation has just "10", while the third generation also has a circle stamped around the number.^[2]

Currently there are third-party magazines available to purchase for the 597.

Aftermarket parts

The 597 is gaining more aftermarket parts but still lacks the enormous variety of the Ruger 10/22, which is its competitor in the marketplace. There are now after market barrels, iron sights, hammers and extractors available for the Model 597, as well as the higher-capacity magazines noted earlier. Volquartsen Custom offers aftermarket barrels, hammers, and extractors.^[3] Tech-SIGHTS offers adjustable aperture sights.^[4]

Model history

.22 Long Rifle (1997–present)
.22 Winchester Magnum Rimfire (1997–present)
.17 Hornady Magnum Rimfire (2002–2009)

Recall information

As of October 2014, Remington has warned customers to discontinue use of the Model 597, .17 HMR, due to safety issues. They offered reimbursement coupons for all Model 597 rifles chambered in .17 HMR, and any Remington-brand .17 HMR ammunition, upon return to Remington.^[5]

Notes

↑ "Model 597 HB". Remington Arms. Retrieved 25 November 2014.
↑ 597 magazine comparison - RimfireCentral.com Forums
↑ Volquartsen Custom
↑ http://www.tech-sights.com/
↑ http://www.remington.com/pages/news-and-resources/safety-center/safety-warning-recall-notice.aspx

External links

Remington Model 597.

Remington Firearms and Cartridges

Rifles

Bolt-action	JuniorTarget 521TL Remington-Keene rifle M1903 Springfield rifle Pattern 1914 Enfield M1917 Enfield Model 5 Model 6 Model 7 Model 30 Model 34 M40 Model 341 Model 504 Model 511 Model 512 Model 513 Model 521 Model 580 Model 581 Model 582 Model 600 Model 660 Model 673 Model 700 Model 710 Model 720 Model 721 Model 722 Model 725 Model 770 Model 788 Model 798 Model 799 M24 Sniper Weapon System M2010 Enhanced Sniper Rifle Modular Sniper Rifle

Pump-action	Model Six Model 14 Model 121 Model 141 Model 572 Model 572 Fieldmaster Model 760 Model 7600 Model 7615

Semi-automatic	Nylon 66 Model Four Model 8 Model 24 Model 241 Model 522 Model 552 Model 597 Model 740 Model 742 Model 7400 Model 750 R5 Remington Gas System Model R-15 Model R-25 RSASS

Automatic	Adaptive Combat Rifle

Single shot	Rolling Block

Shotguns

Pump-action	Model 10 and 29 Model 17 Model 31 Model 870 Model 887

Semi-automatic	Model 11 Model 11-48 Model 58 Model 878 Model 1100 Model 11-87 Model SP-10 SPR 453

Break-action	SPR 100 SPR 310

Handguns

Semi-automatic	1911 R1 Model 51 R51 RM380

Revolver	Model 1858 Model 1875 Model 1890

Derringer	Model 95 Rider Single Shot Pistol Zig-Zag Derringer

Other	XP-100

Cartridges

This article is issued from Wikipedia - version of the 6/26/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.