Revierwasserlaufanstalt Freiberg

The Revierwasserlaufanstalt Freiberg ("Freiberg Mines Water Management System") or RWA Freiberg, was a historical water management system that delivered driving water to the Freiberg mines in the German state of Saxony. Today the system is used to supply drinking and industrial water and is operated by the Saxony State Reservoir Office (Landestalsperrenverwaltung Sachsen).

The Revierwasseranstalt Freiberg has been selected as a candidate for the future UNESCO World Heritage Site of the Ore Mountain Mining Region (Montanregion Erzgebirge).

History

Early history

The beginnings of the Revierwasserlaufanstalt coincide with the start of mining in the Freiberg region in 1168. The term "water management" in this case embraces the many facilities laid out and expanded time and again to handle water for the mining industry, such as ditches (Kunstgräben), water tunnels (Röschen) and ponds or reservoirs (Kunstteiche), that supplied water to the pits, stamp mills and smelteries.

1557–1853

About 1557, Martin Planer began the systematic upgrade of the water management facilities that had hitherto been laid out. This is the starting point for the facilities of the Revierwasserlaufanstalt, a system that is still in operation today.[1] The usual term for this concept at the time was Wasserversorgung ("water supply"); but from about 1846 the term Revierwasserversorgung ("mining area water supply") was used. From about 1684 the Electoral Tunnel and Adit Administration of Freiburg (Kurfürstliche Stolln- und Röschen-Administration zu Freiberg), established by Prince-Elector John George III, was made responsible for water supply facilities, overseen by the Saxon Mining Office (Sächsisches Oberbergamt).[2] It was during that time that facilities such as the Kuhschachter Teich, the Zethauer Kunstgraben, the Große Großhartmannsdorfer Teich, the Müdisdorfer Kunstgraben und Rösche, the Erzengler Teich and the Hohbirker Kunstgraben were built. Because the demand for driving water grew rapidly, when this could be provided by the ever-growing system of ditches the division of water available was optimised. In order to make this comprehensible, the amount of water allocated to individual consumers had to be measured. This led, in the 18th century, to the introduction of a new unit of measurement, the "wheel of water" (Rad Wasser) whereby 100 cubic foot/min = 37.85 l/s).[1][3] Another control mechanism was the water tax (Wassersteuer) where, in 1853, one Lachterrad (37.85l/s at 2 m drop in height for one year =1.194 Mio. m³/year) cost 20 taler.[1]

1853–1913

Under §283 of the law covering the mining by royal assent in the Kingdom of Saxony dated 22 May 1851 the Kurfürst-Johann-Georg-Stolln, the Tiefe Fürstenstolln, the Thelersberger Stolln, the Alte tiefe Fürstenstolln, the Dörnthaler Wasserleitung, the Junger Fürst zu Sachsen Müdisdorfer Rösche, the Martelbacher Rösche the Muldenwasser-Versorgung "with all their fixtures of smelteries, mills, water tunnels, ponds, adits and galleries, whose rights and responsibilities (Rutzungen) and even their entire assets" were transferred to the "Gesammteigenthum des Freiberger Reviers" which had the title of "Revierwasserlaufsanstalt".[4]

Purpose

The ponds or Kunstteiche used to provide water for the mining industry in the Freiberg Mining Field, in order to drive water wheels and stamp mills and to wash the ore. They are connected to one another by around 50 km of ditches (Kunstgräben) and tunnels (Röschen). The Upper RWA supplies drinking water, the Lower RWA industrial water. The RWA system also transfers water from the Rauschenbach Reservoir to the Saidenbach Reservoir in order to supply the Chemnitz area. In addition, water is transferred from the Oberer Großhartmannsdorfer Teich via the Lichtenberg Reservoir and from there to the Klingenberg Reservoir and into the Dresden area.

Construction

The dams of the RWA are earth-fill dams or homogeneous dams with impervious clay cores or clay blankets on the upstream side. The dams are very wide and have steep faces. The downstream, grass-covered faces are sometimes supported by stone arches. On the upstream face the dams have a stone wall (a so-called Tarrasmauer) to guard against waves. To release the water there is a valve (Striegel) operated from the valve house (Striegelhaus) by a winch and spindle.

RWA reservoirs

Today the RWA has 10 ponds or reservoirs that are operated by the Saxony State Reservoir Agency (Landestalsperrenverwaltung Sachsen).

→ List of ponds in the Revierwasserlaufanstalt Freiberg

Neighbouring reservoirs

There are other reservoirs in the neighbourhood, most of which are also very old:

References

  1. 1 2 3 Otfried Wagenbreth (1988), Eberhard Wächtler, ed. (in German), Der Freiberger Bergbau : Technische Denkmale und Geschichte (2. ed.), Leipzig: Deutscher Verlag für Grundstoffindustrie, pp. 62-72, ISBN 3-342-00117-8
  2. ↑ "Revierwasserlaufanstalt Freiberg" (PDF). Retrieved 2011-07-14.
  3. ↑ Kalender für den Sächsischen Berg- und Hütten-Mann auf das Jahr 1850., p. 81
  4. ↑ Regulativ für die Verwaltung der Revierwasserlaufs-Anstalt zu Freiberg, in: Jahrbuch für den Berg- und Hütten-Mann auf das Jahr 1854., p. 86

Sources

This article is issued from Wikipedia - version of the 10/16/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.