SUMIT

Stackable Unified Module Interconnect Technology (SUMIT) is a connector between expansion buses independent of motherboard form factor. Boards featuring SUMIT connectors are usually used in "stacks" where one board sits on top of another. It was published by the Small Form Factor Special Interest Group.[1][2][3]

Details

Two identical connectors carry the signals specified by the SUMIT standard. Commonly referred to as SUMIT A & SUMIT B, designers have the option of designing with either both SUMIT A and B, or just SUMIT A. The signals carried within each connector is as follows:

SUMIT A:

SUMIT B:

As of August 2009, three board form factors used the SUMIT connectors for embedded applications: ISM or SUMIT-ISM [90mm × 96mm], Pico-ITXe [72mm × 100mm], and Pico-I/O [60mm × 72mm].

See also

References

  1. ↑ "What is SUMIT?". Small Form Factor Special Interest Group. 2008-04-11. Retrieved 9 November 2008.
  2. ↑ "SUMIT - Stackable Unified Module Interconnect Technology". Retrieved 9 November 2008.
  3. ↑ "Pico-ITXe Specification". VIA Technologies Inc. 2008. Retrieved 9 November 2008.

External links


This article is issued from Wikipedia - version of the 1/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.