Henry Fowler (engineer)

Sir Henry Fowler
Born (1870-07-29)29 July 1870
Evesham, Worcestershire.
Died 16 October 1938(1938-10-16) (aged 68)
Spondon, Derby, Derbyshire.
Nationality British
Education Mason Science College, now the University of Birmingham

Engineering career

Discipline Locomotive engineer
Institutions Institution of Mechanical Engineers

Sir Henry Fowler, KBE (29 July 1870 – 16 October 1938) was a chief mechanical engineer of the Midland Railway and subsequently the London, Midland and Scottish Railway.

Biography

Mason Science College, now the University of Birmingham

Fowler was born in Evesham, Worcestershire, on 29 July 1870. His father, also called Henry, was a furniture dealer, and his family were Quakers. He was educated at Prince Henry's High School, Evesham, and at Mason Science College (which became the University of Birmingham) between 1885 and 1887 where he studied metallurgy. He served an apprenticeship under John Aspinall at the Lancashire and Yorkshire Railway (L&YR)'s Horwich Works from 1887 to 1891. He then spent four years in the Testing Department under George Hughes, whom he succeeded as head of the department.

Between 1895 and 1900 he was gas engineer of the L&YR, moving on 18 June 1900 to the Midland Railway (MR). On 1 November 1905 he became assistant works manager, being promoted to works manager two years later. In 1909 he succeeded Richard Deeley as chief mechanical engineer (CME) of the MR.

Between 1915 and 1919 Fowler was employed on war work and James Anderson became acting CME. During World War 1 he was seconded to the Ministry of Munitions, being director of production from 1915 to 1917 and then assistant director general of aircraft production.[1] In 1919, Fowler was made a Knight Commander of the Order of the British Empire (KBE) for his contributions to the war effort.[2][3]

In 1923 on the Grouping, he was appointed deputy CME of the newly formed London, Midland and Scottish Railway (LMS), under George Hughes and became CME in October 1925. He was also invited to serve on the Government Bridge Stress Committee investigating stresses in railway-bridges, especially as regards the effects of moving loads

Along with Anderson, Fowler was responsible for the adoption by the LMS of the Midland's small engine policy. Various Midland standard types were built by the LMS, including the 4P Midland Compound 4-4-0, the 2P 4-4-0, the 4F 0-6-0, and the 3F 0-6-0T. The small engine policy resulted in frequent double-heading, as the locomotives were not powerful enough to cope with loads, and thus increased expense. Standardisation also left these standard locomotives with short-travel valves and small axle boxes, the former leading to inefficiency and the latter to frequent hot axle boxes.

In 1928, the LMS introduced the Royal Scot 4-6-0 express passenger locomotive, based on the SR Lord Nelson Class.

In another departure from the small engine policy, several 2-6-0+0-6-2 Beyer-Garratts were acquired for the Toton-Brent coal trains but interference from Derby saw these receive standard small axle-boxes and short-travel valves with the result that they were poor performers.

Fowler was not a hands-on engineer in the mould of George Jackson Churchward. Although (as was traditional) designs produced during his tenure were credited to him as "Fowler" locomotives, the majority of the work was done by his staff with minimal personal involvement from Fowler. An analogy may be made with his successor Sir William Stanier's Princess Coronation (Duchess) class, which was largely designed by LMS draughtsmen while Stanier was out of the country, although Stanier was more deeply involved in other designs during his tenure.

Fowler retired in 1933, Ernest Lemon initially taking over as CME for a short period before William Stanier was head-hunted into the job from the Great Western Railway. Stanier was to reform LMS locomotive policy.

Fowler died on 14 October 1938 at his home - Spondon Hall (now demolished), Derby. He was buried in the Nottingham Road Cemetery, Chaddesden, Derby.

Locomotive designs

The following classes of steam locomotive were introduced by Sir Henry:

References

  1. ↑ http://www.steamindex.com/people/fowler.htm
  2. ↑ The London Gazette: (Supplement) no. 31297. p. 4991. 15 April 1919. Retrieved 2009-06-19.
  3. ↑ The London Gazette: (Supplement) no. 31457. p. 8989. 11 July 1919. Retrieved 2009-06-19.

External links

Business positions
Preceded by
Richard Deeley		 Chief mechanical engineer of the Midland Railway
1909–1923 		Succeeded by
George Hughes
as CME of the London, Midland and Scottish Railway
Preceded by
George Hughes		 Chief mechanical engineer of the London, Midland and Scottish Railway
1925–1931 		Succeeded by
Ernest Lemon
Professional and academic associations
Preceded by
Sir William Reavell		 President of the Institution of Mechanical Engineers
1927 		Succeeded by
Richard William Allen
This article is issued from Wikipedia - version of the 7/23/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.