South Devon Railway Dido class

South Devon Railway Dido class

GWR 2151 Argo at Swindon in 1892 awaiting dismantling following the end of the Great Western Railway's broad gauge services.
Type and origin
Power type Steam
Builder Slaughter, Grüning and Company
Serial number 392–396, 523–524, 558
Build date 1860–1864
Total produced 8
Specifications
Configuration 0-6-0ST
UIC class C n2t
Gauge 7 ft 1⁄4 in (2,140 mm)
Driver dia.
  • First two: 4 ft 6 in (1.37 m)
  • Remainder: 4 ft 9 in (1.45 m)
Wheelbase
  • First two: 15 ft 5 in (4.70 m)
  • Remainder: 15 ft 4 in (4.67 m)
Water cap 1,100 imp gal (5,000 l; 1,300 US gal)
Cylinders Two, inside
Cylinder size
  • First two: 16 1⁄2 in × 24 in (420 mm × 610 mm)
  • Remainder: 17 in × 24 in (430 mm × 610 mm)
Career
Operators
Class Dido
Numbers GWR 2143–44, 2148–53
Withdrawn 1877–1892
Disposition All scrapped

The eight Dido class locomotives were 0-6-0 saddle tank broad gauge locomotives operated on the South Devon Railway and Cornwall Railway and associated other adjacent railways. They were designed for goods trains but were also used on passenger trains when required.

The locomotives were ordered by Evans, Walker and Gooch who were now contracted to operate the locomotives for both the railways. They were built by Slaughter, Grüning and Company.

The locomotives of both railways were operated as a combined fleet by the South Devon Railway after 1 July 1866. On 1 February 1876 the South Devon Railway was amalgamated with the Great Western Railway, the locomotives were given numbers by their new owners but continued to carry their names too.

Four similar locomotives were built for the Vale of Neath Railway in 1861. Some of these could be found working on the South Devon lines after the 1876 amalgamation.

There is some question of identification between some members of this class and the closely related Romulus class, see Sheppard (2008). The earlier Dido locomotives had 16½ in × 24 in cylinders and 4 ft 6 in driving wheels, the later Romulus locomotives had slightly larger cylinders and wheels of 17 in × 24 in and 4 ft 9 in wheels.[1] Sheppard (2008) lists Hebe, Ajax, Brutus, Argo, Atlas, Juno as the Romulus class, along with Romulus and Remus. The Dido class (which Sheppard (2008) describes as the Ada class) consists of Dido and Hero, together with three Llynvi Valley Railway locomotives: Rosa (rebuilt from a 4-4-0ST), Ada and Una.

Locomotives

South Devon Railway

Hebe was at Brent on 22 November 1873 when its boiler blew up. It got its name from Hebe, the Greek goddess of youth.
The locomotive was named after Ajax, a Greek hero.
Although a South Devon Railway locomotive, it was originally delivered to work on the Cornwall Railway. On 13 September 1866 Brutus failed while working a goods train. It was left at Plympton while another locomotive took the train on. The mail train failed to stop at the signal and collided with the locomotive standing there, after which it ran away down the line, running through the buffer stop at the Plymouth terminus and ending up in the cloakroom.
The original Brutus was one of Julius Caesar's assassins.
The Roman Juno was worshipped as the queen of their gods.

Cornwall Railway

The name of this locomotive comes from Dido, the Queen of Carthage.
A hero can be an idealized character in mythology or folklore but in this case probably refers to Hero, a priestess of Aphrodite.
The original Argo was the ship that carried Jason and the Argonauts on their adventures.
The original Atlas was a Greek Titan.

References

Selected bibliography

This article is issued from Wikipedia - version of the 2/9/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.