Walkman DD Series

The Walkman DD was an early series in Sony's Walkman line of portable audio cassette players.

WM-DD

The first model of the series, the WM-DD, was introduced in 1982, and had a solid reputation for performance.

Specifications

Body dimensions (WxHxD): 79×109.2x29mm
Weight (with batteries): 290g
Power: 3VDC, from 2 AA batteries, an AC adapter (AC-39), or from an automobile adapter (DCC-127A, PC-200)
Battery life: 4 hours manganese batteries, alkaline batteries 9 hours (AA batteries)
Maximum output power: 20 mW +20 mW headphone output
Wow and flutter: 0.08% WRMS
Frequency response: 40 ~ 12,000 Hz (normal tape), 40 ~ 15,000 Hz (metal cro2 tape)
Headphone Accessories: MDR-W5

WM-DD2

The WM-DD2 was introduced in 1984, and appeared to be a WM-DD that was available in same colors and had the addition of Dolby B noise reduction. In marketing terms this is exactly what it was, though technically the change was far from trivial. The innovation that made this change possible was the introduction of miniature Dolby ICs that could run directly from the 3V battery supply without the need for a DC-DC converter (as had had to be employed in the WM-7, for example). Even with these devices the changes made between the WM-DD and the WM-DD2 were far reaching and only possible because the printed circuit board was made with track work on both sides.

All the user saw, however, was an important extra switch to enable Dolby NR. The next step in the evolution of the Walkman was to add quartz crystal lock to the DD capstan, this appeared in the next model in the series, the WM-DD3.

Specifications

Body dimensions (WxHxD): 113×90.1×34.2mm
Weight (with batteries): 290g
Power: 3VDC, from 2 AA batteries, an AC adapter (AC-D2), or from an automobile adapter (DCC-70)
Battery life: 3.5 hours using manganese batteries, 7 hours with alkaline batteries
Maximum output power: 20 mW +20 mW headphone output
Noise reduction: Dolby B
Frequency response: 40 ~ 15,000 Hz (when using a metal cro2 tape)
Headphone Accessories: Comes with headphones with microphone

WM-DD3

The WM-DD3 was similar in appearance to the WM-DD2 but the button layout had been changed. It was available in the same three colors as the WM-DD and WM-DD2, but was also available in black. The WM-DD3 was in simple terms a development of the WM-DD2. Building on the strengths of the previous model it added a quartz-locked action to the drive motor, giving absolute speed stability under all operating conditions. A similar system had been used in the WM-D6 but the WM-DD3 was the first playback-only model to use it.

Unlike the WM-D6 the WM-DD3 did not offer the facility to defeat the quartz lock and trim the playback speed manually, instead the circuit was permanently active and fully automatic in action. Quartz lock aside, the WM-DD3 was nearly identical to the WM-DD2, including the provision of Dolby B NR and compatibility for all tape types.

References

External links

Gizmodo: Notable and crazy-Sony cassette Walkman editions
Sony Vintage

This article is issued from Wikipedia - version of the 11/9/2015. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.