Warp-weighted loom

Icelandic warp-weighted loom
Saxon loomweights
Reconstruction of a vertical neolithic loom with genuine loom weights and with string heddles , National museum of textile industry, Sliven, Bulgaria
Reconstruction of a vertical neolithic loom with shed bar without string heddles, on display at Piatra Neamţ Museum
Warp weighted loom with string heddles in the Central Textile Museum in Łódź, Poland

The warp-weighted loom is a simple and ancient form of loom in which the warp yarns hang freely from a bar supported by upright poles which can be placed at a convenient slant against a wall. Bundles of warp threads are tied to hanging weights called loom weights which keep the threads taut.[1] Evidence of the warp-weighted loom appears in the Neolithic period in central Europe. It is depicted in artifacts of Bronze Age Greece and was common throughout Europe, remaining in use in Scandinavia into modern times. Loom weights from the Bronze Age were excavated in Miletos, Greece.[2]

History

The warp-weighted loom may have originated in the Neolithic period. The earliest evidence of warp-weighted looms comes from sites belonging to the Starčevo culture in modern Serbia and from late Neolithic sites in Switzerland.[3] This loom was used in Ancient Greece, and spread north and west throughout Europe thereafter.[4] It was extensively used in the north among Scandinavian people.[5] For yet unknown reasons, the warp-weighted loom diminished in popularity and disappeared from common use.[6] The arrival of mechanized looms and industry may have contributed to this decline. It remained in use longest in Scandinavia; researcher Marta Hoffman found warp-weighted looms still in use on an isolated island off the coast of Norway and among the Sami of Norway and Finland in the 1950s.[7] Today, the warp-weighted loom is used as a hobby and in historic preservation societies.[8]

Use

The warp-weighted loom is used in a near-vertical position, and the fabric is woven from the top of the loom toward the ground. This allows the weaver to walk back-and-forth while working, so that wider cloth can be woven than is practical on a ground loom. On Ancient Greek vase paintings, two weavers, most often women, are shown working side-by-side on the warp-weighted loom.[8] This is unusual because most other looms require a resting position of standing or sitting. According to Artemidorus, if one dreams of a warp-weighted loom it means an upcoming journey. If one dreams of any other type of loom, one should expect rest.[9]

Additionally, extra warp thread can be wound around the weights. When a weaver has reached the bottom of the available warp, the completed section can be rolled around the top beam, and additional lengths of warp threads can be unwound from the weights to continue. This frees the weaver from vertical size constraints.

Notes

  1. ↑ Burnham 1980, p. 177
  2. ↑ Gleba, Margarita and Joanne Culter. Textile Production in Bronze Age Miletos: First Observations. in Aegaeum 33 Annales liégeoises et PASPiennes d’archéologie égéenne: Kosmos - Jewellery, Adornment and Textiles in the Aegean Bronze Age, Peeters Leuven - Liège 2012, p. 113-120.
  3. ↑ Barber 1991, pp. 93–96
  4. ↑ Crowfoot 1936, p. 36
  5. ↑ Crowfoot 1936, p. 40
  6. ↑ Crowfoot 1936, p. 38
  7. ↑ Hoffman 1974, pp. 1–2
  8. 1 2 Carroll 1983, p. 98
  9. ↑ Crowfoot 1936, p. 47

References

This article is issued from Wikipedia - version of the 11/3/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.