Whitlash-Aden Border Crossing

Whitlash-Aden Border Crossing

US Border Inspection Station at Whitlash, Montana, as seen in 1997. This building was replaced in 2012.
Location
Country United States; Canada
Location

US Port: 10 Whitlash Road, Whitlash, Montana 59545

Canadian Port: Highway #880 South, Aden, Alberta T0K 0A0
Coordinates 48°59′50″N 111°15′31″W / 48.997251°N 111.258717°W / 48.997251; -111.258717
Details
Opened 1929
US Phone (406) 432-5522
Canadian Phone (800) 461 9999
Hours 9:00am - 5:00pm
Website
http://www.cbp.gov/contact/ports/whitlash

The Whitlash-Aden Border Crossing connects the town of Whitlash, Montana with Aden, Alberta on the Canada–United States border. The Whitlash Port of Entry is the least trafficked of all the land border crossings entering the United States, averaging just 2 vehicles per day.[1] In spite of this fact, both the US and Canada spent considerable funds replacing their border inspection facilities in 2012.

History

The crossing was established in 1929, when Canada decided to close its facility at nearby Pinhorn, Alberta.[2] Prior to the 2012 reconstruction of the US and Canada border stations, the US operated out of a red wooden structure built in 1974, and Canada had a white steel building constructed in 1973 that lacked an inspection canopy. This is one of the few crossings on the Canada–United States border that is located on an unpaved road, although about 100 yards of road surface directly in front of the new US border station was paved in 2012.

See also

References

  1. "Use of American Recovery and Reinvestment Act Funds by U.S. Customs and Border Protection for Construction of Land Ports of Entry" (PDF). Department of Homeland Security, Office of Inspector General. 26 August 2011. Retrieved 18 January 2016.
  2. Legg, Herbert (1962). Customs services in western Canada, 1867-1925; a History, The Creston Review Ltd., Creston, BC
This article is issued from Wikipedia - version of the 9/21/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.