Wright Whirlwind series

Whirlwind series
Partially sectioned Wright J-4B at Canada Aviation Museum
Type Air-cooled radial piston engine
National origin United States
Manufacturer Wright Aeronautical




The Wright Whirlwind was a family of air-cooled radial aircraft engines built by Wright Aeronautical (originally an independent company, later a division of Curtiss-Wright). The family began with nine-cylinder engines, and later expanded to include five-cylinder and seven-cylinder varieties. Fourteen-cylinder twin-row versions were also developed, but these were not commercially produced.

Description

The Whirlwind was a direct descendant of the Lawrance J-1, a nine-cylinder air-cooled radial built by the Lawrance Aero Engine Company for the U.S. Navy. Because the Navy was very enthusiastic about air-cooled radials, but was concerned that Lawrance could not produce enough engines for its needs, it forced Wright to purchase the Lawrance company in 1923 and build the J-1 itself. Wright's J-1 was the first engine in its nine-cylinder R-790 Whirlwind series and was quickly followed by the J-3, J-4, J-4A, J-4B, and finally the popular and successful J-5 of 1925.

In 1928, Wright replaced the R-790 series with the J-6 Whirlwind family, in which a supercharger was added to boost engine power and the cylinders were enlarged by expanding the bore. This family included three members: the nine-cylinder R-975, the seven-cylinder R-760, and the five-cylinder R-540, providing a range of different power levels using the same basic design. Of these, the R-975 proved the most popular, especially because of its use in armored fighting vehicles during World War II.

During the mid-1930s, Wright also developed two fourteen-cylinder double-row versions of the Whirlwind, the R-1510 of 600 hp (450 kW), and the R-1670 of 800 hp (600 kW). These were used in a number of military aircraft prototypes, but neither engine reached the production stage.[1][2]

Air-cooled Whirlwinds were lighter and more reliable than liquid-cooled engines of similar power, since a liquid cooling system added weight and required extra maintenance. Thanks to these advantages Whirlwind engines were used widely and were built in large numbers. Licensed copies were produced by manufacturers such as Continental Motors, Hispano-Suiza, and Shvetsov. The Whirlwind's success led to the development of other air-cooled radial engines throughout the 1920s, 1930s, and 1940s and these gradually eclipsed most liquid-cooled aircraft engines.

Whirlwind series

See also


Comparable engines
Related lists

References

  1. ↑ Curtiss-Wright (1940), p. 16
  2. ↑ Curtiss-Wright (1983), p. 5. (Page 4 may also be relevant but is unfortunately missing from the scanned copy linked below.)
This article is issued from Wikipedia - version of the 10/2/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.