4.5-inch Gun M1

4.5 inch Gun M1 on Carriage M1

4.5 inch Gun M1 at the U.S. Army Field Artillery Museum, Ft. Sill, Oklahoma
Type Field gun
Place of origin USA
Service history
In service 1942-1945
Used by USA
Wars WWII
Production history
Designed 1939-1941
Produced 1942-44
Number built 416
Specifications
Weight 5,654 kg (12,465 lbs)
Length 8.15 m (27 ft)
Barrel length Bore: 4.756 m (15 ft 7 in) L/41.6
Overall: 4.918 m (16 ft 2 in) L/43
Width 2.4 m (7 ft 10 in)
Height 2.12 m (6 ft 11 in)
Shell separate-loading bagged charge
Caliber 114 mm / 4.5 inch
Breech interrupted screw
Recoil hydropneumatic
Carriage split trail
Elevation 0° to +65°
Traverse 53°
Rate of fire Burst: 4 rounds per minute
Sustained: 1 round per minute
Muzzle velocity 693 m/s (2,274 ft/s)
Maximum firing range 19,317 m (21,125 yds)
Sights panoramic, M12

The 4.5 inch Gun M1 was a field gun developed in the United States in the beginning of World War II. It shared the same carriage with the 155mm Howitzer M1 and fired the same ammunition as the British BL 4.5 inch Medium Field Gun. The weapon was used by the US Army in Northwest Europe late in the war for corps support; with the end of hostilities it was declared obsolete.

Development and production

In 1920 the US Army Ordnance started to work on a new medium field gun. Since the US Army had already employed the 4.7 inch Gun M1906 during World War I, this caliber was also selected for the new weapon. The development resulted in 4.7 inch Gun M1922E on Carriage M1921E. Due to lack of funding, the design never reached production.[1][2]

In 1939 the program was restarted; the renewed design, designated 4.7 inch Gun T3, was ready by early 1940; it utilized the same carriage as the concurrently developed 155 mm howitzer. At this stage, the army decided to change the weapon to use the British 4.5 inch ammunition. The modified gun was standardized in April 1941 as 4.5 inch Gun M1 on Carriage M1.[1][2]

The production started in September 1942 and continued until February 1944.[2]

Production of M1[3]
Year 1942 1943 1944 Total
Produced, pcs. 41 345 40 416

Description

The M1 was very similar in construction and appearance to the 155mm Howitzer M1. The only significant difference was its tube of 4.5 inch (114 mm) caliber. The tube had uniform right hand twist, with one turn in 32 calibers.[4] The unbalanced weight of the barrel was supported by two equilibrator springs. The breach was of interrupted screw type; the recoil system hydropneumatic, variable length. The carriage was of split trail type, unsprung and had wheels with pneumatic tires. In firing position, the weapon was supported by a retractable pedestal. The gun was equipped with M12 panoramic sight.[5]

Service

155 mm Howitzer M1 (left) and 4.5 inch Gun M1 (right) at the U.S. Army Field Artillery Museum, Ft. Sill, OK. Note the similarity between the two pieces.

The M1 equipped 16[2] or 17[6] field artillery battalions in the Northwest Europe, where it was employed for corps support. M5 High Speed Tractor was assigned as prime mover. The weapon was declared obsolete in September 1945.[1][2]

The gun had good range, nearly five km longer than its 155 mm howitzer sibling and longer than the 155 mm Gun M1918MI. It was out-ranged by another 155 mm gun, the Long Tom, but the latter was nearly three times heavier.

On the other side, the 4.5 inch gun was criticized for insufficient power of its high-explosive shell. The shell was produced from low grade ("19 ton") steel, which necessitated thick walls. As a result, it carried only about two kg of TNT or substitute, in fact less than the 105 mm high-explosive shell. Additionally, it was felt that having a small number of guns of atypical caliber unnecessarily complicated logistics.[1][2]

Variants

External image
4.5 inch GMC T16.

The weapon was experimentally mounted on a lengthened chassis of the M5 light tank, in mount M1. The resulting vehicle received the designation 4.5in Gun Motor Carriage T16. A single prototype was built.[7]

Ammunition

The M1 utilized separate loading, bagged charge ammunition. Only high explosive projectile was available.[8]

The projectile could be fired with propelling charge M7 (normal) at reduced velocity or with propelling charge M8 (super) to achieve full velocity. The dummy propelling charge M6 simulated the M8 charge.[9] The velocity and range data in the table below is for the M8 charge.

Available ammunition.[4][8][10]
Type Model Projectile weight, kg Filler Muzzle velocity, m/s Range, m
HE HE M65 Shell 24.9 TNT, 2.04 kg or
Amatol 50/50, 1.85 kg or
Trimonite, 2.10 kg		 693 19,317
Dummy Dummy M8 Projectile - -
 
Propelling charges[9]
Model Weight, complete, kg Components
M7 (normal) 2.95 Single section
M8 (super) 5.08 Base charge and increment
M6 (dummy) 5.40 Base charge and increment
 
Concrete penetration, mm[4]
Ammunition \ Distance, m 0 914 4,572 9,144
HE M65 Shell (meet angle 0°) 1,158 1,067 640 366
Different methods of measurement were used in different countries / periods. Therefore, direct comparison is often impossible.

Notes

  1. 1 2 3 4 5 Hogg - Allied Artillery of World War II, p 50-51.
  2. 1 2 3 4 5 6 7 8 9 Zaloga - US Field Artillery of World War II, p 18-19.
  3. ↑ Zaloga - US Field Artillery of World War II, p 9.
  4. 1 2 3 Hunnicutt - Stuart: A History of the American Light Tank, p 506.
  5. ↑ Technical Manual TM 9-2005 volume 3, Infantry and Cavalry Accompanying Weapons, p 59-62.
  6. ↑ Anderson - US Army in World War II.
  7. ↑ Hunnicutt - Stuart: A History of the American Light Tank, p 337-338.
  8. 1 2 Technical Manual TM 9-1904, Ammunition Inspection Guide, p 486-490.
  9. 1 2 Technical Manual TM 9-1901, Artillery Ammunition, p 300-304.
  10. ↑ Technical Manual TM 9-1901, Artillery Ammunition, p 183-184.

References

Wikimedia Commons has media related to 4.5 inch Gun M1.
This article is issued from Wikipedia - version of the 9/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.