Beretta Nano
| Nano | |
|---|---|
|
Beretta Nano with holster | |
| Type | Semi-Automatic Pistol |
| Place of origin | Manufactured in the US |
| Production history | |
| Manufacturer | Beretta |
| Unit cost | $536 |
| Specifications | |
| Weight | 17 ounces (0.48 kg) |
| Length | 5.6 inches (14 cm) |
| Width | .9 inches (2.3 cm) |
| Height | 4.17 inches (10.6 cm) |
|
| |
| Caliber | 9×19mm Parabellum, .40 S&W |
| Barrels | 3.07 inches (7.8 cm) |
| Action | DAO |
The Beretta Nano is a semi-automatic, striker fired, micro compact pistol line manufactured by Beretta in the United States at its Accokeek, Maryland facility. The Nano was designed and engineered to be capable of firing a .40 S&W round but the pistol's initial release is chambered in 9mm. It has been available since October 2011.[1] The Nano is currently not available for sale in California.
Design
The Beretta Nano is a compact handgun developed for concealed carry. It has a technopolymer frame and a Pronox finished slide. Pronox is a nitriding finish similar to Tenifer (as used on for example Glock pistols) and Melonite (as used on for example Springfield Armory XD and Smith & Wesson M&P pistols). The sights on the Nano are low-profile 3-dot sights.
The 9mm version of the Nano holds 6 rounds of ammunition in a single-column box magazine, for a total capacity of 7 if the pistol is chambered and the magazine is fully loaded. The .40 S&W version of the pistol reportedly has an identical 6+1 capacity.
The Nano was designed with a serial-numbered chassis separate from the frame, an unusual feature notably also found in the SIG Sauer P250-series pistols. This will allow Beretta to provide additional frames in the future, allowing for a variety of grips and colors. The chassis is removable and can be placed in the alternate frames.
Designed to be used as a concealed carry self-defense weapon, the Nano has no external slide lock or release. Additionally, the Nano has no external safety. The absence of these protruding controls reduces the likelihood of the weapon snagging on clothing during an occasion where a quick and clean draw is required. The slide locks in a rear position after the magazine has been emptied. A loaded magazine must then be installed, or the empty magazine withdrawn, and the slide must be pulled rearward, in order to cycle the slide completely.
Early owners of the Nano voiced concern about an intermittent failure to eject (FTE) while using lower quality ammunition with 115 grain bullets. Many pragmatic users of the Nano counter that 115 grain ammunition would seldom, if ever, see service in the Nano as it is employed to its intended purpose of a concealed carry defensive weapon. Many add that the Nano is rated for 9mm+P ammunition, and as such requires ammunition heavier than 115 grains to function as designed. Most Nano owners agree that the pistol functions best on ammunition with bullets of 124 grains or heavier.
Users
References
Further Reading
https://web.archive.org/web/20120517000654/http://berettanano.com:80/techspecs.html https://web.archive.org/web/20120525051642/http://www.berettausa.com/products/nano/