Bottle sling

Bottle sling
Names Bottle sling, Bottle knot, Jug sling, Jug knot, Jar knot, Moonshiner's knot, Hackamore, Hackamore knot, Bridle knot, Beggarman's knot
Category Binding
Origin Ancient
Related Jury mast knot, Miller's knot, Fiador knot
Typical use Suspending bottles and other similar objects
Caveat Cord must be scaled to size of bottle's flare or collar
ABoK #260, #1142, #2007, #2186, #2300, #2554

The bottle sling (or jug sling) is a knot which can be used to create a handle for a glass or ceramic container with a slippery narrow neck, as long as the neck widens slightly near the top.[1]

While classed with binding knots, such as the reef knot and miller's knot, the bottle sling is able to perform a function for which most other binding knots are unsuited. The bottle sling's specific form allows it to grip a cylinder, assuming it has even a slight flare or collar, and lift it along its axis when the knot is loaded by all four strands.[1] With appropriate size cord, most wine bottles can be reliably suspended with this knot.

History

The bottle sling was described in detail by the Greek physician Heraklas in his first century monograph on surgical knots and slings. It was included under the name diplous karkhesios brokhos ("double jug-sling noose"). Clearly familiar with the knot, Heraklas provided three distinct tying methods.[2][3] Knot expert Cyrus L. Day believed the bottle sling was not described again in print until Craigin's 1884 A Boy's Workshop,[4][5] although Clifford Ashley noted it was illustrated in Johann Röding's 1795 Allgemeines Wörterbuch der Marine.[1]

Usage

Mockup of a rope fiador with the doubled "hackamore knot" at the bottom

As the name suggests, the primary use for this knot is to suspend bottles, jugs, and other items with similar shapes. The space at the center of the knot is dropped over the top of a bottle or similar object. Firmly pulling on all four ends emerging from the knot tightens it against the neck of the bottle. Looping the running ends through the bight and tying them together will make a sling that grips and can be used to lift the bottle.[6] This provides a convenient method of lowering a beverage bottle from a boat into the water to chill.

As mentioned above, the knot is believed to have been used medically in ancient Greece for applying traction in the reduction of fractures and dislocations. However it is not known to have any current medical application.[3]

The knot is also said to have been used as an improvised emergency bridle when rope was the only material at hand. Its use is described with the central parts of the knot acting as a bit, one of the knot's outer bights passing over the top of the animal's muzzle, and the other passing under the jaw to form the noseband. The closed loop end of the knot would be placed over the animal's head and behind the ears, as a crownpiece, and the two free ends coming off under the chin used as reins. It was intended only for temporary use.[7] However at least one author has disputed this as "nonsense" and suggests its only proper equestrian use is in a doubled form, in this context known as a hackamore knot, to secure the fiador to the bosal in some hackamore designs.[8]

Tying

Perhaps not surprisingly—given three were already known to the ancient Greeks—there are many methods to tie the bottle sling. Swedish physiologist and knot researcher Hjalmar Öhrvall listed eight in his 1916 book Om Knutar.[9][10]

One method for tying the bottle sling is similar to the loop-and-weave method used to tie the jury mast knot and the trumpet knot. The knot is begun by making a bight in a piece of rope and folding the bight back on itself to make two separated loops that are mirror images of each other. Lay one loop on top of the other so that they overlap slightly and create a cat's eye shaped hole above a triangular shaped hole between the two loops. Make a bird's beak with your index and thumb and weave them down through the loop, up through the cat's eye and down through the bottom loop, bunching the coils of rope against your fingers. Pinch the section of rope that was the bottom of the triangle and flip the coils over the pinched section. The flip may take a little practice, but the pinched section should become a short bight hanging off a circular shaped knot.

See also

References

  1. 1 2 3 Ashley, Clifford W. (1944), The Ashley Book of Knots, New York: Doubleday, p. 208
  2. Day, Cyrus L. (1967), Quipus and Witches' Knots, Lawrence: University of Kansas Press, pp. 87–88, 119–124
  3. 1 2 Hage, J. Joris (April 2008), "Heraklas on Knots: Sixteen Surgical Nooses and Knots from the First Century A.D.", World Journal of Surgery, 32 (4), p. 652, doi:10.1007/s00268-007-9359-x, PMID 18224483, retrieved 2009-07-15
  4. Day(1967), p. 88
  5. Craigin, Harry (1884). A Boy's Workshop. Boston: Lothrop, Lee & Shepard. pp. 212–213.
  6. Budworth, Geoffrey (1997), The Complete Book of Knots, London: Octopus, pp. 80–81
  7. Riley, Howard W. (January 1912). "Knots, Hitches, and Splices". The Cornell Reading-Courses. Rural Engineering Series No. 1. Ithaca, NY: New York State College of Agriculture at Cornell University. 1 (8): 1449. Retrieved 2011-11-08. As collected in Documents of the Assembly of the State of New York, 136th Session, 1913, Vol. 19, No. 29, Part 5.
  8. Grant, Bruce (2004) [1972], Encyclopedia of Rawhide and Leather Braiding, Atglen, Pennsylvania: Cornell Maritime Press, p. 144
  9. van de Griend, Pieter (May 2008), "Hjalmar Öhrwall on Knots (1): Life and Works", Knot News, International Guild of Knot Tyers - Pacific Branch (67), ISSN 1554-1843
  10. Öhrvall, Hjalmar (1916). Om Knutar (2nd ed.). Stockholm: Albert Bonniers Förlag. pp. 96–104.
This article is issued from Wikipedia - version of the 11/29/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.