Farrimond friction hitch

Farrimond Friction Hitch
Category Hitch
Origin Barry Farrimond 2008
Related Taut-line hitch, Prusik knot, Siberian hitch
Releasing Quick release
Typical use Camping, Adjusting line tension

The Farrimond friction hitch is a quick release adjustable friction hitch for use on lines under tension. It is useful when the length of a line will need to be periodically adjusted in order to maintain or adjust tension whilst remaining quick and easy to untie; such as when hanging the ridge line for a Basha (tarpaulin). It can be used in very effective conjunction with the Siberian hitch for this purpose.

History

The first known presentation of this knot was made by British actor Barry Farrimond in 2008 during a demonstration at the Yellow Wood Bush Camp, Wales.[1]

Tying

The diagram below is shown from a birds eye perspective with the green dot representing a fixed point such as a tree or post which a ridge line might be attached to. After passing the working end around the back of this fixed point, create a loop that is then placed on top of the ridge line as in fig 1. Once this has been done take the loop and wrap it around the ridge line (following the directions shown by the red arrows) until you reach fig 4. Next take the working end of the rope and create a bight (knot) in it. Follow the red arrow in fig 4 which shows the bight being passed under and through the hoop of rope to form the knot's quick release mechanism. Once the knot has been tightened up it should be able to resist considerable load on the ridge line whilst remaining easy to adjust and quick to release.

See also

References

This article is issued from Wikipedia - version of the 11/6/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.