WAGR C class

Not to be confused with WAGR C class (1880) or WAGR C class (diesel).
WAGR C class

Cs270 Black Butt on the Banksiadale mill railway, ca. 1960
Type and origin
Power type Steam
Builder Baldwin Locomotive Works
Midland Railway Workshops
Total produced 22
Specifications
Configuration 4-6-0 and 4–6–2
Gauge 3 ft 6 in (1,067 mm)
Length 55 ft 3 in (16.84 m)
Total weight C: 67 long tons 10 cwt (151,200 lb or 68.6 t)
Cs: 71 long tons 9 cwt (160,000 lb or 72.6 t)
Fuel type Coal
Fuel capacity 5 long tons 0 cwt (11,200 lb or 5.1 t)
Water cap 2,500 imp gal (11,000 L; 3,000 US gal)
Firebox:
 • Firegrate area		 17.75 sq ft (1.649 m2)
Boiler pressure 175 psi (1,207 kPa)
Valve gear Walschaerts
Performance figures
Tractive effort 18,182 lbf (80.88 kN)
Factor of adh. 3.5
Career
Operators Western Australian Government Railways
Numbers C264-C275, C431-C440
Nicknames Baby Yanks
First run 1 July 1902
Retired 1964
Disposition all scrapped

The WAGR C class was a class of light axle load steam locomotives operated by the Western Australian Government Railways (WAGR) between 1902 and 1961. A total of 22 were built in two batches.[1]

History

The first batch of 12 engines was built by Baldwin Locomotive Works, Philadelphia in 1902. This batch was originally of a 4-6-0 wheel arrangement, and was a lighter version of the Ec class, gaining them the Baby Yanks nickname. Between 1908 and 1918 these were fitted with larger, improved boilers and converted to a 4-6-2 configuration. A second batch of 10 engines was built by the WAGR's Midland Railway Workshops in 1915, to the modified 4-6-2 design.[2][3]

They entered service on mixed passenger and mail services on the Eastern, Eastern Goldfields and Great Southern lines. They later operated on the Northern and South Western lines.[3]

Seventeen members of the class were later fitted with superheaters and reclassified as the Cs class with the first completed in June 1929. In the 1940s, five received new frames. Four of these, Cs270 Black Butt, Cs432 Marri, Cs439 Banksia and Cs440 Jarrah were transferred to the Railway Department Sawmill at Banksiadale in the early 1950s and named. All were included in the sale of the timber mill to Hawker Siddeley Building Supplies in October 1961. After being replaced by road transport, all were scrapped at Subiaco in June 1964.[1][3][4]

Namesakes

The C class designation was previously used for the C class locomotives that were withdrawn in 1902. It was reused in the 1960s when the C class diesel locomotives entered service.

See also

References

Notes

  1. 1 2 Gunsburg 1984, p. 75.
  2. ↑ Gunsburg 1984, pp. 72–73.
  3. 1 2 3 Turner, Jim (1997). Australian Steam Locomotives 1896-1958. Kenthurst: Kangaroo Press. pp. 30, 147. ISBN 086417778X.
  4. ↑ Gunzburg, Adrian; Austin, Jeff (2008). Rails Through the Bush. Perth: Rail Heritage WA. pp. 124, 125, 130. ISBN 978 0 9803922 2 7.

Cited works

  • Gunzburg, Adrian (1984). A History of WAGR Steam Locomotives. Perth: Australian Railway Historical Society (Western Australian Division). ISBN 0959969039. 

Media related to WAGR C class at Wikimedia Commons

This article is issued from Wikipedia - version of the 9/19/2016. The text is available under the Creative Commons Attribution/Share Alike but additional terms may apply for the media files.