GWR 2251 Class

GWR 2251 Class

3203 at Newent 1959

Type and origin Power type Steam Designer Charles Collett Builder GWR Swindon Works Build date 1930–1948 Total produced 120

Specifications Configuration 0-6-0 UIC class C h2 Gauge 4 ft 8 ^1⁄2 in (1,435 mm) standard gauge Driver dia. 5 ft 2 in (1.575 m) Minimum curve 4 ^1⁄2 chains (297 ft; 91 m) normal, 4 chains (264 ft; 80 m) slow Length 53 ft 8 ^1⁄4 in (16.36 m) Width 8 ft 5 in (2.565 m) Height 12 ft 8 ^1⁄2 in (3.874 m) Axle load 15 long tons 15 cwt (35,300 lb or 16 t) (17.6 short tons) full Loco weight 43 long tons 8 cwt (97,200 lb or 44.1 t) (48.6 short tons) full Tender weight 36 long tons 15 cwt (82,300 lb or 37.3 t) (41.2 short tons) full Fuel type Coal Fuel capacity 5 long tons 0 cwt (11,200 lb or 5.1 t) (5.6 short tons) Water cap 3,000 imp gal (14,000 l; 3,600 US gal) Firebox:  • Firegrate area 17.40 sq ft (1.617 m^2) Boiler pressure 200 lbf/in^2 (1.38 MPa) Heating surface:  • Tubes 1,069 sq ft (99.3 m^2)  • Firebox 102 sq ft (9.5 m^2)/ Superheater: ​  • Type 4-element or 6-element  • Heating area 4-element: 52.98 sq ft (4.922 m^2), 6-element: 70.00 sq ft (6.503 m^2) Cylinders Two, inside Cylinder size 17.5 in × 24 in (444 mm × 610 mm)

Performance figures Tractive effort 20,155 lbf (89.65 kN)

Career Operators GWR » BR Power class GWR: B, BR: 3MT Numbers 2251–2299, 2200–2250, 3200–3219 Axle load class Yellow Withdrawn 1958–1965 Disposition One preserved, remainder scrapped

The Great Western Railway (GWR) 2251 Class was a class of 0-6-0 steam tender locomotive designed for medium-powered freight. They were introduced in 1930 as a replacement for the earlier Dean Goods 0-6-0s and built up to 1948. In service they were colloquially known simply as 'Colletts'.

Overview

In many ways, the 2251s were modernised Dean Goods, sharing the main dimensions, but having more modern features such as taper boilers and full cabs. Increases in both boiler pressure and heating surface gave a useful increase in power at the expense of weight that restricted permitted routes. Numbers 2211–2230, built in 1940 did not have side windows. Designed by Charles Collett for medium freight and passenger duties they had 5 ft 2 in (1.575 m) driving wheels. Carrying a maximum of 3,000 imperial gallons (14,000 l; 3,600 US gal) of water to fuel a boiler operating at 200 psi (1.4 MPa) they developed 20,155 lbf (89.65 kN) of tractive effort. They could be found operating on most parts of the former GWR system. These were the first GWR 0-6-0 to use the standard number 10 boiler as later fitted to the 94xx, 15xx and various rebuilds of absorbed mainly Welsh locomotives.

They were withdrawn between 1958 and 1965.

Preservation

Preserved 3205 on the Gloucestershire Warwickshire Railway.

One, 3205, has been preserved and is located on the South Devon Railway in Devon.^[1]

Models

Peco and Bachmann Branchline manufacture models of the 2251 in N scale and OO gauge respectively. Mainline (Palitoy) released the first ready-to-run OO model in 1978. The Bachmann model was released in 1996. It is based on the Mainline model with revised body tooling to complement a completely new chassis design that allows the boiler backhead to be modelled.

References

1. "GWR 0-6-0 No 3205". South Devon Railway. Retrieved 2014-11-29.

• Whitehurst, Brian (1973). Great Western engines, names, numbers, types, classes: 1940 to preservation. Oxford: Oxford Publishing Company. pp. 23–24, 30, 102, 127. ISBN 0-902888-21-8. OCLC 815661.

External links

• Great Western Archive – Introduction to 2251 Class
• Great Western Archive – Shed allocations, build and withdrawal dates
• Railuk database
• Heritage Railways Loco Database – entry for no. 3205
• Preserved locomotive database entry for No. 3205