New South Wales D59 class locomotive

New South Wales D59 class

Oil burning 5903 heading south at Hawkesbury River station

Type and origin Power type Steam Builder Baldwin Locomotive Works Philadelphia Serial number 75564–75583 Build date 1952 Total produced 20

Specifications Configuration 2-8-2 UIC class 1'D1'h Gauge 4 ft 8 ^1⁄2 in (1,435 mm) Driver dia. 5 ft 0 in (1.524 m) Adhesive weight 65 t (64.0 long tons; 71.7 short tons) Loco weight 91 t (89.6 long tons; 100.3 short tons) Fuel type Oil, later coal Fuel capacity 10,800 litres (2,400 imp gal; 2,900 US gal) (oil) 11 t (10.8 long tons; 12.1 short tons) (coal) Water cap 24,750 litres (5,440 imp gal; 6,540 US gal) Firebox:  • Firegrate area 47 sq ft (4.4 m^2) Boiler pressure 1,378 kPa (199.9 psi) Heating surface 2,165 sq ft (201.1 m^2) Superheater: ​  • Heating area 625 sq ft (58.1 m^2) Cylinders Two, outside Cylinder size 21 in × 28 in (533.4 mm × 711.2 mm) Valve gear Walscharts

Performance figures Tractive effort 34,986 lbf (155.6 kN) Factor of adh. 4.09

Career Operators New South Wales Government Railways Class D59 Numbers 5901–5920 Disposition 5 preserved, 15 scrapped

The 59 Class was a class of steam locomotive built by Baldwin Locomotive Works for the New South Wales Government Railways of Australia.

History

The class were ordered from the Baldwin Locomotive Works to relieve motive power shortages. The design is a variation on the USATC S200 Class Mikado, a design which first appeared in 1941.

Twenty locomotives entered service between August 1952 and March 1953. The most immediately apparent difference is the rather stubby short tender that was specially built to allow the 59 class to be turned on standard 60-foot (18.29 m) turntables. It was the specification of these tenders which considerably delayed the delivery from initial order. Unfortunately due to the weight of the locomotive it was eventually discovered in service that most 60-foot (18.29 m) turntables could not turn the 59 class due to balancing issues.^[1][2]

The class was the first oil burners to be introduced by the New South Wales Government Railways and were the first locomotives to be built by Baldwin since 1905. They were initially used on the Short North from Enfield to Broadmeadow. They were soon placed in service on both the Main Western and Main South lines and, although their light axle load made them available to a large proportion of the state, their sphere of operation was limited by the location of oil fueling facilities. Accordingly, they saw most of their service as oil burners working on the Main North and North Coast lines, as well as in the Sydney metropolitan area.^[2]

In 1961 it was decided to convert the majority of the class to coal burning. Seventeen were treated using an ashpan based on the 38 class arrangements, together with modifications to the smokebox, fitting of brick arches, grates, firehole doors, etc. Two 59 class (5908 and 5916) remained as oil burners (the other member of the class had been previously scrapped) and they ended their service as shunters at Grafton before being transferred to Broadmeadow Locomotive Depot in December 1970 as stationary boilers.^[3] In August 1974, 5916 was sent to the Eveleigh Carriage Workshops for a similar duty.

The coal burning locomotives were mainly operated from Enfield Locomotive Depot, working to Goulburn. They were also based at Broadmeadow Locomotive Depot, working from Gosford to Armidale. From February 1967 59 class locomotives were allocated to Bathurst for banking duties on Raglan and Tumulla banks. During 1968/69 59 class were often used on freight trains to Taree during a motive power shortage.^[1][2]

Preservation

Withdrawals began in June 1969 with the last withdrawn in December 1972.^[4]

Preserved Steam Locomotives
No.	Description	Organisation	Location	Status	Ref
5908	oil burning	New South Wales Rail Transport Museum	Goulburn Roundhouse	static exhibit	NSW Locomotive, Steam 5908
5910	coal burning	New South Wales Rail Transport Museum	Thirlmere	static exhibit	NSW Locomotive, Steam 5910
5916	oil burning	Not listed	Goulburn Roundhouse	sectioning proposed	Not Listed [5]
5917	coal burning	5917 Society	Eveleigh Railway Workshops	operational
5920	coal burning	Dorrigo Steam Railway & Museum	Dorrigo	stored	Last steam loco imported from USA [6]

References

1. "Our Baldwin Yankees - The D59 Class Mikados" Roundhouse January 1981 page 12
2. Grunbach, Alex (1989). A Compendium of New South Wales Steam Locomotives. Sydney: Australian Railway Historical Society, NSW Division. pp. 236–239. ISBN 0 909650 27 6.
3. "20 Years Ago" Railway Digest March 1991 page 102
4. Oberg, Leon (1984). Locomotives of Australia 1850's - 1980's. Frenchs Forest: Reed Books. pp. 206–207. ISBN 0 730100 05 7.
5. NSW Heritage Register Locomotives, Steam
6. Dorrigo Railway Museum 1050

External links

Media related to New South Wales D59 class locomotive at Wikimedia Commons